leaves or crap in the fan blade?
Anyone had problems with there MA61/RA60/65 etc heater and air con fans?? mine seems as if its working really hard on full setting by the sounds of it but its just crap and hardly blows any air?? wanna get it fixed so i can run air con again...
leaves or crap in the fan blade?
hello
took all the glovebox off and inspected just then and its clean as a whistle. im thinking fan speed resistor? anyone replaced these before? looks like a bastard to get too..
well is it spinning fast?
could be big leaks at all the joins in the pipework, either that or you have it on demist![]()
MY RIDE, 2 Door LHD KE70 sedan with 1G HKS stroker: http://www.toymods.org.au/forums/showthread.php?t=51760
Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'
Blower resistor takes about 3 seconds to get to once the glove box it out.
It would be rare for them to fail in the manner of which you speak.
Normally the coils break, and so the fan doesn't work on that speed at all.
If the fan is making a fair amount of noise on top speed, then its an airflow blockage, not a fan speed issue.
Peewee
1985 MZ12 Soarer - 1UZ Powered
2013 86 GTS
as i said in the PM i sent you easy to fix...
you have my number.. ring & i can help....
cheers
Project: '82, GA61 XX
the evapourators often clog up with mud also
hello
Bookmarks