1ggte spigot bearing, need a part #!!

**VasH** · 07-08-2008, 06:58 PM

Hey, does anyone happen to know what the part # would be for a spigot bearing to suit a
1ggte??

i got told a 6201 by skf the inside diametre is ok but its too big on the outside.

help please!!

**af300e** · 07-08-2008, 10:31 PM

Just make sure you measure the correct part of the flywheel, it goes in and seats on the first shoulder, not right into the blind hole. Usually they are a pretty generic size eg 12mm id, 32mm od, I think I remember that being the size of my 3sgte one.

If it goes into the crank, perhaps the shoulders are different.

**wilbo666** · 07-08-2008, 10:38 PM

What do you mean, by too big on the outside diameter?

It does need to get hammered into the back of the crank (with a large socket on the OD of the bearing so as to not damage it).

Exedy also say 1G is 6201 spigot bearing...
http://www.exedy.com.au/SpecSheet.as...eetRowId=40374

Cheers
Wilbo

**jimmmayyy** · 07-08-2008, 11:41 PM

7M, 1G and JZ spigot bearings are all the same, its 6201.

**VasH** · 07-08-2008, 11:48 PM

strange it seemed to be too big on the outside diametre. ill have another look tommorow i hope you guys are right

**Hengsta** · 07-08-2008, 11:50 PM

Originally Posted by wilbo666

What do you mean, by too big on the outside diameter?

It does need to get hammered into the back of the crank (with a large socket on the OD of the bearing so as to not damage it).

What he said.

**Turdinator** · 08-08-2008, 12:50 PM

If it is actually too big, the next std size down on the od is a 6001.

**takai** · 08-08-2008, 12:58 PM

6001 is 4AGE and probably other engines with the crank of a similar size.

**VasH** · 08-08-2008, 05:04 PM

Got one straight from toyota and its definatly smaller than the 6201 so its not gonna be the same as a 1jz, not sure about 7m

the part # is 9036312003 for anyone interested cost about $17

**JZA70R_92** · 08-08-2008, 07:06 PM

1ggte = 6001

**jimmmayyy** · 08-08-2008, 08:01 PM

I find that a bit odd since they all use the same gearbox. 7MGE with a W58 is 6201.

**takai** · 09-08-2008, 12:06 AM

They all have a 12mm ID on the bearing, the OD is what changes.

**wilbo666** · 09-08-2008, 08:01 AM

Well there you go!

Exedy is wrong!

My bad

Cheers
Wilbo

**JZA70R_92** · 15-12-2008, 11:43 AM

just to clarify..I'm using a w58 behind a 7MGE so which is the part number I need...Just orderd 7mgte one but could be wrong

**wilbo666** · 15-12-2008, 12:25 PM

Originally Posted by GA70H_92

just to clarify..I'm using a w58 behind a 7MGE so which is the part number I need...Just orderd 7mgte one but could be wrong

6201 for M series engines (All M series are the same).

Cheers
Wilbo

Thread: 1ggte spigot bearing, need a part #!!

Thread Tools