1g boost controller pics

[celupra]

Any one got any pics handy of there bleed valves on there 1ggte. Did a search couldnt find much

[Snyper]

no pics close up, but you basically need to put a t piece in the hose for both turbos, one in each hose, then run a hose from this t piece into another t piece, with your bleed valve on the end of this one.. if you understand that easy enough..

Brendon

[MotivatedSeller]

Where abouts does each hose run form the turbos (i.e. location of it)? Also, where do you run it to?

I've got a basic turbosmart boost controller that i haven't had time to hook up yet. All it says is one end goes to the turbo the other to the wastegate... As my car is my daily runner, I don't have the time to unbolt everything to find where it has to go... more detail would be appreciated and rewarded with I love you so much!'s

[GZ20 - Jake]

id like to know where to put mine too lol theres a vacuum line from turbo to wastegate? seems pretty unreachable tho... id reward with a few love ya's too hahaha

[brett_celicacoupe]

you only need one pressure signal line so you just block the other one off.

i bought T piece to suit the outlet from pirtek for like $5



3 lines, one block off nipple and your done

[celupra]

Yeah i figured you took both actuator and comp housing lines and brought them to a t piece, just sounded messy

[GZ20 - Jake]

pictures anyone? would be more than appreciated!

[Gttwinturbomk3]

Picture didnt show up

[Gttwinturbomk3]

Here is a pic of one typical way that you can connect a boost tap onto 1ggte.