ring toyota and check the part number!
hey ya just wonderin if any of these trd oil filters will fit a 2tg;
http://cgi.ebay.com.au/TRD-Oil-Filte...QQcmdZViewItem
may be a stupid question but worth it if they are better than ryco ones. ryco code is z10 if that helps in any way
Last edited by old_school_jap1; 30-10-2007 at 07:39 PM.
ring toyota and check the part number!
RA23 1JZ VVTi 373hp - SOLD
12.4 @ 110mph
THE EVOROLLA262.9hp - SOLD
JZ parts facebook page - https://www.facebook.com/groups/524841910926804/
the 3rd type should fit.
Toyota have superceeded the 2T oil filter to a 90915-YZZD2 now and this is equivalent to it.
anybody used them who can vouch for them??? they are a bit pricey, wouldn't wanna be crap
I wouldn't bother paying the extra for the TRD oil filter, just use the genuine toyota filter. I can almost guarantee the TRD one is just a different paint on the casing from the normal genuine filter.
Wollongong Sporting Car Club - Secretary
Current Cars:
2004 TW Magna VR-X AWD w/6G74 - Tow Car
1989 AW11 MR2 w/4A-GE 20V - Track Car
slightly o.t do ryco filters have that drain back valve thingy
Originally Posted by psychofox
actually they are completly different inside.
they are excellent filters, i used them on my ae101, was a definite increase in the time needed before the oil was black.
in saying that for your normal road car the genuine in fine.
i tend to recommend the TRD filter for engines with a high volume/pressure oil system.
I DONT WORK FOR TOYOTA ANYMORE
please, no more PMs!
I stand corrected. So they aren't just for bling factor. Who makes them (as TRD hardly does them themselves)? Denso?
Wollongong Sporting Car Club - Secretary
Current Cars:
2004 TW Magna VR-X AWD w/6G74 - Tow Car
1989 AW11 MR2 w/4A-GE 20V - Track Car
nope not just for bling
though im sure a lot of ppl use them for bling! lol
no idea who makes them, nothing on them about that.
just says made in japan
I DONT WORK FOR TOYOTA ANYMORE
please, no more PMs!
so the 3rd type for sure will fit????
on a side note does anyboby reckon a first series 2tg won't like runnin on GTX2 as they have now labelled it 'modern engine oil' for some reason??? i've got tons of the GTX2 modern engine stuff coz me dad got it cheap. what's everybody out there run their 2tg on????
The current Denso Toyota ones are made in Thailand...must be that the higher quality ones are still mad in Japan.
What are the TRD ones for the A Series motors worth?
Wollongong Sporting Car Club - Secretary
Current Cars:
2004 TW Magna VR-X AWD w/6G74 - Tow Car
1989 AW11 MR2 w/4A-GE 20V - Track Car
type one fits 4ages before 87and type 2 fits 4ages after 87 from the ebay link i posted earlier. they're all $40 plus postage. can anyone answer my previous questions???
$40 for an oil filter...what a rip off - just buy 4 toyota filters and change the filter every 2000kms and you'll be WAY in front.
Wollongong Sporting Car Club - Secretary
Current Cars:
2004 TW Magna VR-X AWD w/6G74 - Tow Car
1989 AW11 MR2 w/4A-GE 20V - Track Car
the genuine filters we get here are made in japan.
yes that filter will fit a 2T fine
cant comment on the oil as castrol dropped the GTX and GTX2 names here years ago
$40aud is a rip. they are $35nz here.
not a rip for the applications they are made for
I DONT WORK FOR TOYOTA ANYMORE
please, no more PMs!
my engine is meant to have been worked for rally before i got it with a bigger port job, i have also taken the spacers out of the solex carbs and they are 48mm (from 40mm) at the filter end. it goes to 7000rpm without complaints and doesnt smoke, although it is burnin the crappy oil thats in it up. if its gonna do revs like that wouldn't a good filter be the way to go???? i mean i've only spent about $3000 on it and its on the road and registered the least i could do is put a good filter and good oil in it
Bookmarks