ae92 rear mount!!

[deaf_rattle]

everytime i have to put the rear mount back in its a pain the rear.
Has anyone got a good way of putting the rear mount in that doesnt take large chunks of skin off and is quicker than 40 mins?!! haha

cheers

[unleashed__]

try an engine brace

[IN 05 NT]

or a trolley jak

[Dale]

Take both the crossmembers off to change it

[Talasas]

I know it's a bit late, but it's good for archiving:

I fit that mount after the timing cover side mount and all the other mounts loose. I hold the engine up with the crane and lift it up and down until I can position the rear mount. Once that one is in, I fit the gearbox mount, centre mount and the others.

A trolley jack under the gearbox also helps with height adjustment.

[deaf_rattle]

thanks guys
forgot about this post.
In the end i hammered out the studs and welded nuts on the mount.
Then bolted the mount in from underneath! so easy.
why it didnt come out like this i dont know.