4x100 +0 offset rims???

[TERRA Operative]

Whats avaliable?

I'm looking for a set of 0 offset (or close to) for my rollas wide body conversion (Got dish?) and am looking for 7" for the front and 8" for the rear in 16" diameter.
Most 4x100 seems to be around the +30 to +40 offset. I need these things to stick out from the guards!




Any pointers? I want forged lightweight in a 5 spoke design.

[oldcorollas]

try looking at the japanese wheel makers sites. they list all the available (current) sizes..
closest i can quickly find is 14", 6.5width, 4x114.3 in 0 offset

all 16" in 4x100 are high offsets

edit: if anything, you will be looking at a custom 3 piece... (or a ghey 40mm spacer )

this is for carpark posing? what will happen to wheel bearings?

[TERRA Operative]

Yea, I don't really like spacers....


I can make an adapter to step the rear hub out from the knuckle, then it's just a matter of spacing the caliper brackt out the same amount to suit.
But then I loose the awesome dish, and it's not so easy for the front superstrut....

What about if if I go to 17"? Any chance of finding a suitiable rim?

[Draven]

simmons could make some for you, failing all else

[Draven]

and with 0 offset + mega dish, why do you care about weight? they're not exactly going to be ideal for the track anyway

[oldcorollas]

the problem is that all(?) 4x100's are FWD, and all FWD's have +30 or +40 offset.

there is a small market in RWD zero offset rims (4x114.3) but nothing in 4x100 that i can see.

ie, there will be no 1 piece forged 4x100 zero offset. the larger you go, the less likely there is to be a rim. maybe old 14" or something?
check yahoo
http://list1.auctions.yahoo.co.jp/jp...-category.html

15x7 +22 http://page12.auctions.yahoo.co.jp/j...ion/p122566624
+27 http://page6.auctions.yahoo.co.jp/jp/auction/f72063753

[TERRA Operative]

The minimum size i can go is 15", due to the 2pot superstrut brakes.

I want to achieve something like the pictures below, but I'm afraid they used spacers....

[Draven]

you can have those in 17", 4x100, 0 offset (or less), and whatever width you want

[andy1827]

jdmyard has 15*8 and 15*7 rims with 3inch dish 4*100 stud pattern and 0 offset

andrew

[timbosaurus]

you're doing a widebody conversion to your Levin

[oldcorollas]

jdmyard has 15*8 and 15*7 rims with 3inch dish 4*100 stud pattern and 0 offset

andrew

these ones? http://www.mx5mania.com.au/product1508.htm
at $200 they would be cheap china copies no? definitely not forged..
what weight are they?

[JP]

Rota do a few 16" 4x100 +0 rims

http://www.rotawheels.com/wheels.asp?wheelid=20
http://www.rotawheels.com/wheels.asp?wheelid=40
http://www.rotawheels.com/wheels.asp?wheelid=34

[TERRA Operative]

Those first rota wheels look good, what's the quality like?

[JP]

the US honda guys seem to like them

[timbosaurus]

Man... where do you get front guards/spoiler like that!!!