Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: cressida MX83 problem need help

  1. #1
    Junior Member Backyard Mechanic HAIRY_APES_22'S's Avatar
    Join Date
    Nov 2006
    Location
    nsw
    Posts
    221

    Default cressida MX83 problem need help

    hi my mx83 cressida has gone through three dizzys so far one was like brand knew they keep on leaking oil the last one which was like new squirted oil, can someone pls tell me wats the reason for this.
    Are some lines in the engine blocked etc etc
    Rocket covers were also acid dipped and cleaned before the last was dizzy was put in and that too leaked oil badly
    so today i replaced it with another gud one can somebody shine some light one this issue
    also this engine has had the head gasket etc done last year tooo
    can this be due to excess pressure build in the engine.
    Oh yeah it had oil between the two rocket covers etc but i reckon this maybe the seals BUT i cleaned it and tightened the rocket cover and drove it for a week and dats when the dizzy went leaking a heap of oil every where i stopped but there was no oil between the rocket covers were the spark plugs are what can cause this and MORE IMPORTANTLY HOW CAN THIS BE FIXED
    does anyone have any ideas as to why this happens

    thanks
    rav

  2. #2
    Junior Member Domestic Engineer Viper's Avatar
    Join Date
    Oct 2005
    Location
    Vic
    Posts
    620

    Default Re: cressida MX83 problem need help

    Dizzy leaks cos the seals for the main shaft wear a groove into it so the oil can sneak past and dribble out the bottom.
    You will need to get either a brand spanking new one ~$400, or get the old one reconditioned. Cost me about $200.

    The same will happen with most of the dizzy you will get just because of the age of the rubber.
    Daily: '06 Liberty 3.0R specB
    Project Car : '84 MA61: 2JZ-GTE + 6 Speed

  3. #3
    Junior Member Backyard Mechanic HAIRY_APES_22'S's Avatar
    Join Date
    Nov 2006
    Location
    nsw
    Posts
    221

    Default Re: cressida MX83 problem need help

    The last dizzy that was installed was literally like new it only lasted id say like 4months and started dripping oil
    cheers

  4. #4
    Backyard Fabricator Automotive Encyclopaedia
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    1,103

    Default Re: cressida MX83 problem need help

    what condition was the internal oil seal shaft in? They can look brand new on the outside but still have a brittle leaking oil seal on the shaft internally.

    You can use a fluroelastomer oil seal which has higher temp and chemical resistance than the standard oil seals if you had a new seal in the last one and it only lasted 4 months.

  5. #5
    Junior Member Domestic Engineer Viper's Avatar
    Join Date
    Oct 2005
    Location
    Vic
    Posts
    620

    Default Re: cressida MX83 problem need help

    You cant see the internal seal without pressing apart the the dizzy.
    Its a really silly design
    Daily: '06 Liberty 3.0R specB
    Project Car : '84 MA61: 2JZ-GTE + 6 Speed

  6. #6
    Junior Member Backyard Mechanic HAIRY_APES_22'S's Avatar
    Join Date
    Nov 2006
    Location
    nsw
    Posts
    221

    Default Re: cressida MX83 problem need help

    guys can it be due to a build up of pressure/compression in engine causing dizzys to break there seal cause it occured after i tightened the rocket covers due to oil being in the spark park well and theres no oil in the spark plug well now just the dizzy leaking oil like hell every where i park, im just worried its gonna happen to my second hand new dizzy lol
    i hate the 7mge such a crap engine

    cheers
    rav

  7. #7
    Junior Member Backyard Mechanic HAIRY_APES_22'S's Avatar
    Join Date
    Nov 2006
    Location
    nsw
    Posts
    221

    Default Re: cressida MX83 problem need help

    im not sure wat the internal seal was like but i im gussing its busted now but if the one in there goes again i will do somethin like wat u meantioned JP with the the seal
    i didnt have new seals in it, its just the dizzy looked like brand new
    cheers

  8. #8
    is the bestest Conversion King LeeRoy's Avatar
    Join Date
    Feb 2006
    Location
    NSW
    Posts
    2,395

    Default Re: cressida MX83 problem need help

    So you bought new caps or a complete new distributor. ie not bought one from a wrecker, new meaning bought one from toyota.

    These will explain it better
    Click Here and Here
    Daily Driver: Red Ae93 Project: My TA22 - now with 3s-gte
    D is for Disco, E is for Dancing

  9. #9
    RIP Scott Kalitta Automotive Encyclopaedia Mr DOHC's Avatar
    Join Date
    Oct 2005
    Location
    QLD
    Posts
    1,234

    Default Re: cressida MX83 problem need help

    does the oil leak from the inside of the dizzy or outside



    btw, 1J it!!! no dizzys then
    JZX83+ FMIC+ Twin 2.5" dumps to 3"+ FCD+ 2800rpm stallie+ 14psi - LSD - good tyres = 12.85 @105.58

    The boobs are back

  10. #10
    Junior Member Backyard Mechanic HAIRY_APES_22'S's Avatar
    Join Date
    Nov 2006
    Location
    nsw
    Posts
    221

    Default Re: cressida MX83 problem need help

    hi,
    when we reomoved it yesterday it had sprayed oil on the inside of the dizzy cover and it was leaking drop after drop of oil everywhere i parked when i looked it was leaking from below the dizzy, the under part of the dizzy, the new second hand one is in atm we'll see how long dat one last.

    thanks for the link leeroy but man arnt the mx83 dizzys a sealed unit where as the 4age ones can be a pulled apart correct me if im wrong

    cheers

  11. #11
    Backyard Fabricator Automotive Encyclopaedia
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    1,103

    Default Re: cressida MX83 problem need help

    you should still be able to dissasemble the 7M unit to replace the internal seal with a press.

    If you have good seals and it's blowing oil out I'd check/clean your PCV system.

  12. #12
    Junior Member Backyard Mechanic HAIRY_APES_22'S's Avatar
    Join Date
    Nov 2006
    Location
    nsw
    Posts
    221

    Default Re: cressida MX83 problem need help

    hey jp
    wats the pcv system and how do u clean it
    cheers
    rav

  13. #13
    JZ Powered Too Much Toyota EldarO's Avatar
    Join Date
    Oct 2005
    Location
    Western Aus
    Posts
    5,614

    Default Re: cressida MX83 problem need help

    here ya go, for supra, but should be the same:

    http://www.cygnusx1.net/Supra/Librar...Section=EC&P=5

  14. #14
    Gobble, Gobble! Automotive Encyclopaedia mrshin's Avatar
    Join Date
    Nov 2005
    Location
    Montrose
    Posts
    1,154

    Default Re: cressida MX83 problem need help

    As said, service the PCV system, and pull the dizzy apart, it's fairly simple to do. Also see if you've got any other oil leaks, e.g. cam seals, rear seal, etc.

  15. #15
    Junior Member Backyard Mechanic HAIRY_APES_22'S's Avatar
    Join Date
    Nov 2006
    Location
    nsw
    Posts
    221

    Default Re: cressida MX83 problem need help

    thanks guys for all the help and advice
    i will clean the pvc system check the seal and stuff then we'll see wat happens

    cheers
    rav

Similar Threads

  1. MX83 Grande CD/tape player problem
    By big80 in forum Tech and Conversions
    Replies: 7
    Last Post: 13-11-2006, 03:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •