Autronic SM4 thermo fan control

[BlackSupra]

Just wondering if anybody has wired up thermo fans to their sm4.

Is it using the pink wire of output 5 as the trigger?

Does the wire trigger to ground?

How do you go about the setup within the software?

[rms]

Refer to manual. If you did not get a manual with the SM4, go back to the dealer and get one.

It depends on how you set up the software !

[The Real Roadrunner]

ill have to look at the diagram but yes it triggers to ground.
just set the output your using to trigger at the temp you want.

cheers
linden

ask moss when you can meet him here and ill set it up for you.

[BlackSupra]

Refer to manual. If you did not get a manual with the SM4, go back to the dealer and get one.

It depends on how you set up the software !

There wasnt a manual when i bought it!

ill have to look at the diagram but yes it triggers to ground.
just set the output your using to trigger at the temp you want.

I assume it just uses the existing coolant temp sensor for the temp reading?

Does the trigger wire just connect to the ground terminal of the relay?

[The Real Roadrunner]

there still isnt an AUTRONIC manual just a ray hall one that has some backward shite in it that can confuse ppl. (check his dwell recomendations for smart and dumb ignitors)
dong, start harassing mos now as he'll take foreva


cheers
linden

ninja edit: yes to both Qs