Results 1 to 2 of 2

Thread: Fitting 540cc injectors to Gen2 3sgte

  1. 24-08-2007, 06:07 AM #1
    EVL-184
    EVL-184 is offline
    Junior Member 1st year Apprentice
    Join Date
    Dec 2006
    Location
    nsw
    Posts
    6

    Default Fitting 540cc injectors to Gen2 3sgte

    Hi all,Ive sourced my self a set of 540cc injectors from a ST205, and wanna fit them to my gen 2 3sgte, Apart from a fuel rail rebore, what else should i do , mainly wanna hear from people that hav done this injector swap before.?
    Any pics or advice is thanked in advance..

    I hav a Walbro 255lph pump fitted atm..will i need a larger pump,like a Bosch motorsport etc,.?
    Reply With Quote Reply With Quote
  2. 24-08-2007, 12:58 PM #2
    ToDa30/4
    ToDa30/4 is offline
    Olde ****** Automotive Encyclopaedia ToDa30/4's Avatar
    Join Date
    Dec 2005
    Location
    south australia
    Posts
    1,092

    Default Re: Fitting 540cc injectors to Gen2 3sgte

    u can fit them with out touching the rail bore if u want ,use new o rings , pump is fine
    Project ST215W 300 AWKW Killerwagg'ss .staring in the garage .soon
    ST185R 385 AWKW now SOLD ..Daily '89 Eunos Roadster.
    Project '75 KE30 37.4 RwKw PIMPster. doing it for Angela RIP 1964 - 2011
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. 3sgte gen 2 injectors. how much power?
    By millsi in forum Tech and Conversions
    Replies: 28
    Last Post: 02-07-2006, 10:08 PM
  2. Aftermarket engine management and injectors
    By benjamin in forum Tech and Conversions
    Replies: 14
    Last Post: 14-05-2006, 02:05 PM
  3. FAQ: 3SGTE Gen3 / Gen2 Differences
    By Toobs in forum Tech and Conversions
    Replies: 14
    Last Post: 10-10-2005, 04:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules