for temporary?
clean very well, grind surface clean and degrease thoroughly...
then get epoxy resin/araldite and chux superwipes or similar
higher temp resin will last longer.
i have a crackjed top tank, is there a way to fix it, i.e. clean it perfectly and use a resin to block it
JZX83+ FMIC+ Twin 2.5" dumps to 3"+ FCD+ 2800rpm stallie+ 14psi - LSD - good tyres = 12.85 @105.58
The boobs are back
for temporary?
clean very well, grind surface clean and degrease thoroughly...
then get epoxy resin/araldite and chux superwipes or similar
higher temp resin will last longer.
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
temporary = 1 week, till jambo is over
JZX83+ FMIC+ Twin 2.5" dumps to 3"+ FCD+ 2800rpm stallie+ 14psi - LSD - good tyres = 12.85 @105.58
The boobs are back
and run 7psi cap?![]()
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
quicksteel.
but even then, your pushing it.
Elmo.
i dunno.. with 5 min araldite and chuck superwipes, i had a top tank (and cover on head) last for about a year![]()
"I'm a Teaspoon, not a mechanic"
"There is hardly anything in the world that a man can not make a little worse and sell a little cheaper" - John Ruskin (1819 - 1900)
AU$TRALIA... come and stay and PAY and PAY!!! The moral high horse of the world!
cant you bronze it?
GA23(never finished-now with cracked block) JZX83 (Tyre eater) 3sgte AE86. by now i should know better.
plastic tanks.
Stu's idea sounds like a winner then, but you have to make sure the tank is empty, and dead cold, and makes sure its set rock hard before you start it.
Elmo.
why not just get a 2nd hand cressida one to get you through mate. the top bolt holes for ht fan are fine, there arent any ont he botom just put some rubber aorund themso they dotn rub through.
you have seen the result of leaked coolant under the tyres before. not worht the risk
8.3 et PB 169 MPH PB
whats the result of leaked coolant under the tyres?Originally Posted by 1JZ.747
Significantly shortened cars.Originally Posted by IN 05 NT
ask rodi, he fucked his car at the strip last week
its just that i'm significantly running out of time
JZX83+ FMIC+ Twin 2.5" dumps to 3"+ FCD+ 2800rpm stallie+ 14psi - LSD - good tyres = 12.85 @105.58
The boobs are back
haha yeah i follow....Originally Posted by Mr DOHC
takes 10mins to pull the rad from the cressy, drop it at your local RAD shop, top tank will average at about $150 to replace, and you will have it back the same day usually!,
blake![]()
Hey all, a quick easy fix is the araldite glue, put it on good and thick and heaps around the crack.... if dryed and done right will hold for a good time... or you can go to a auto shop and get radiator/petrol tank repair stuff... looks like kneadit but flat and u rub it into a ball then spread onto... very good stuff when usesd correctly
hope that helps
Ed
--------------------------------------------------------------------------------
Eddie 0433 85 69 66
u cant get top tanks for JZX81 cores, they are 5mm wider than cressy ones
JZX83+ FMIC+ Twin 2.5" dumps to 3"+ FCD+ 2800rpm stallie+ 14psi - LSD - good tyres = 12.85 @105.58
The boobs are back
Bookmarks