Please Help coFF33 with his Cresta 1S engine issue

[o_man_ra23]

Oh, and why no bypass the 2S-C and go to a 3SGE BEAMS motor and 6 speed manual (seriously)... that would be waaay fun, without diverting from the whole luxury car theme.

Cheers, Owen

[Mathew]

best way to check firing setup is to take off rocker cover so you can see the cams and then with the spark plugs out turn motor over in a clockwise direction and follow the sequence - inlet cam opens and piston drops - inlet valve closses and the piston comes up to top dead centre - check that both cams are on the minimum diameter and then creep up to top dead centre as shown on the crank balancer - this is top dead firing position for number one piston put the dizzy in and double check firing order of plug leads - should fire straight up!!

Matt

[Admiral coFF33]

the plan for this car was to not touch the engine once its running and keep it as a slow ass Bosozoku car that is only for looks .
and spend fuckall money doing this ...

[river]

Hi,

Bosozoku, eh?

Well, I want exhaust pipes sticking 10 feet up in the air and your dining table grafted on the front for the spoiler.

seeyuzz
river

[Wildsupra]

Hi,

Bosozoku, eh?

Well, I want exhaust pipes sticking 10 feet up in the air and your dining table grafted on the front for the spoiler.

seeyuzz
river

that wouldnt be the first car he has had with furniture grafter to the front

let us all remember the gemini with the outdoor chair legs gaffa taped as a bonnet scoop......that was fully sick, especially once colour coded green

Matty