Page 3 of 4 FirstFirst 1234 LastLast
Results 31 to 45 of 53

Thread: 1JZ problems

  1. #31
    Junior Member Domestic Engineer urantia's Avatar
    Join Date
    Oct 2005
    Location
    WA
    Posts
    711

    Default Re: 1JZ problems

    shit that isn't bad, let me know if he comes thru with the goods at that price

    i'm after a set aswell.

  2. #32
    Junior Member Grease Monkey cressida_1jz's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    48

    Default Re: 1JZ problems

    Toyota said $120 each incl GST.I thought they would be more than that.

    I sugested Bosch coil packs and he said there a heap of garbage compared to the Denso ones.

    And they just slot strait in.

    They dont come with the blue rubber boot.
    1997 JZX100 Chaser Tourer V
    1991 Cressida Grande 1JZ-GTE *sold*

  3. #33
    Junior Member Grease Monkey cressida_1jz's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    48

    Default Re: 1JZ problems

    double posted.Sorry
    1997 JZX100 Chaser Tourer V
    1991 Cressida Grande 1JZ-GTE *sold*

  4. #34
    Corona loving Grease Monkey TTMX83's Avatar
    Join Date
    Nov 2005
    Location
    Victoria
    Posts
    159

    Default Re: 1JZ problems

    Great news for you. I think my problem goes a bit deeper than that. I paid $140 for a coil from Toyota, with the boot. Retail was a bit over $160. I will try my car without the O2 sensor anyway, it always runs rich too. Keep us informed on the progress.

    Brad.

  5. #35
    Sucks to be a Domestic Engineer YelloRolla's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    598

    Default Re: 1JZ problems

    Remember when changing coils to clean the spark plugs before trying it out. I just give the plugs a squirt of carby cleaner.

    I have had the problem before (not a 1JZ) where the coils were frigged, when I replaced them the problem remained UNTIL I changed the plugs. I reason that the plugs were fouled from insufficient spark and a nice rich mixture of Optimax.
    YelloRolla's KE20 1/4mi = 11.32 @ 119mph @ 22psi on slicks
    12.44 @ 113 mph on 165 wide street tyres
    210rwkw - not bad for a smelly 3TGTE running pump fuel.

  6. #36
    Corona loving Grease Monkey TTMX83's Avatar
    Join Date
    Nov 2005
    Location
    Victoria
    Posts
    159

    Default Re: 1JZ problems

    YelloRolla - Thanks for that. I put new plugs in at the same time.

    But I have found the (well, a problem.) The injectors are leaking, They don't hold pressure and the engine is struggling to idle due to the amount of fuel getting pumped into it. Now I need to take them out to test them but I'm not convinced that is the only problem.

    I found a couple of leaky capacitors in the ECU that I will change out when I can get the right value. All of the loom checks out OK so far.

    ALL my coils have cracks in them too. For now I have just taped them up with insulation tape till new ones get here. There was one that had a jumping spark but I replaced it with a brand new one. The others weren't jumping but I taped them anyway.

    No problem as I won't be driving it at all and it's been like this since Christmas. I'm getting withdrawals...

    Cheers Brad.

  7. #37
    Junior Member Grease Monkey cressida_1jz's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    48

    Default Re: 1JZ problems

    I drove the car home today(30km)from work and it was running beautiful.

    AFR guage is working good now.

    I have a gut feeling still that it hasnt fixed the problem after trying so many things

    Il see how it goes tomorrow.

    Would u think a o2 sensor would do this?
    Last edited by cressida_1jz; 07-02-2006 at 09:23 PM.
    1997 JZX100 Chaser Tourer V
    1991 Cressida Grande 1JZ-GTE *sold*

  8. #38
    Corona loving Grease Monkey TTMX83's Avatar
    Join Date
    Nov 2005
    Location
    Victoria
    Posts
    159

    Default Re: 1JZ problems

    Just see how it goes I guess. Mine isn't driveable at all now.... Working on another car to use as a daily driver now, so the Cressida get the back seat for a few days.

    Cheers Brad.

  9. #39
    Junior Member Grease Monkey cressida_1jz's Avatar
    Join Date
    Nov 2005
    Location
    NSW
    Posts
    48

    Default Re: 1JZ problems

    It played up again this morning.

    Pulled out the ECU and gave it to the wiring guy to sus out.

    3 caps were leaking and 1 of them was coroded from the fluid in it.

    Getting it repaired for $20 of him.

    Im 80% sure thats my problem.

    Il see how i go.
    1997 JZX100 Chaser Tourer V
    1991 Cressida Grande 1JZ-GTE *sold*

  10. #40
    Corona loving Grease Monkey TTMX83's Avatar
    Join Date
    Nov 2005
    Location
    Victoria
    Posts
    159

    Default Re: 1JZ problems

    Awesome news. I had two leaking ones but I could only get four of the five in there, I'm replacing them all After I change them all, I will report back.

    Cheers Brad.

  11. #41
    Junior Member Domestic Engineer urantia's Avatar
    Join Date
    Oct 2005
    Location
    WA
    Posts
    711

    Default Re: 1JZ problems

    Fancy that! the chances of you both having a ECU's with leaky caps. And i always thought the ECU was the last thing to go wrong!

  12. #42
    jetpilot Automotive Encyclopaedia 1JZ.747's Avatar
    Join Date
    Nov 2005
    Location
    nsw
    Posts
    958

    Default Re: 1JZ problems

    02 sensor dont worry about it


    i and joey didnt run o2 sensors on ours once we got twin pipes made up. the cars used a little more fuel than before but no that much that you really noticed it.

  13. #43
    Corona loving Grease Monkey TTMX83's Avatar
    Join Date
    Nov 2005
    Location
    Victoria
    Posts
    159

    Default Re: 1JZ problems

    Well it seems my car is stuffed. I got another ECU to try and it made no difference. Got a set of injectors (Whole rail and FPR) last night to try. Working out the best way to do it today.

  14. #44
    Junior Member Domestic Engineer urantia's Avatar
    Join Date
    Oct 2005
    Location
    WA
    Posts
    711

    Default Re: 1JZ problems

    keep us updated, i'm curious to know how it goes after trying another set of injectors/fuel rail and pressure regualtor.
    98 3rz-fe Hilux 4x4
    97 Hiace AWD Super Custom 1kz turbo diesel (sold)
    87 MA70 w/ 1JZ-GTE Manual Conversion GT (moss growing on roof deteriorating away but open to offers)

  15. #45
    Corona loving Grease Monkey TTMX83's Avatar
    Join Date
    Nov 2005
    Location
    Victoria
    Posts
    159

    Default Re: 1JZ problems

    Well, the injectors all read 14ohm, they all click when supplied 12V. The seals are all buggered Off to get seals.

    How do I get to the rear 3 injectors without taking the manifold off? It looks like a pleasant job

    Cheers Brad.

Similar Threads

  1. 1jz vs 2jz heads
    By chris davey in forum Tech and Conversions
    Replies: 33
    Last Post: 04-05-2006, 10:07 AM
  2. 2T-G/3T Hybrid Compression Problems
    By sillycar chick in forum Tech and Conversions
    Replies: 41
    Last Post: 05-02-2006, 08:03 PM
  3. MA70 heating problems.
    By EldarO in forum Tech and Conversions
    Replies: 50
    Last Post: 02-02-2006, 02:35 PM
  4. Upgrading 1JZ alternator
    By beasht in forum Tech and Conversions
    Replies: 10
    Last Post: 19-01-2006, 09:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •