Shock help/advice

[indeecent]

Hey,

I'm currently in searching for an insert, that has pretty much the same dimensions as the tokico HTS102 (for the ae86 im pretty sure)

Through searching on here, I found that KYB make the AGX version for the 86? Yet this is not said so according to their website.

Is the insert (im not entirely sure on what i read.) the same dimensions as the ST204?
43.5mm OD cartridge and ~332mm compressed? Will these handle high spring rates?

My issue lies with the fact it's going in a JIC front coilover that was customised for the HTS102, and the car is a mx83 cressida, spring being 12kg/mm.

What shock will be able to sit happy with this combo, something hopefully not too expensive...

The TRD inserts fit, but can they take the weight of the car and spring combo?

Any help is appreciated.

Thanks.
David.

[The Real Roadrunner]

use a set of konis for a commonwhore they should fit check the dimensions with your local supplier.
the valving should be stiff enough as its supposed to hold up a land barge
3 different types reds,yellows and a competition unit.
only comp ver is bump and rebound adj , the others are just rebound adj

[indeecent]

The cressida is currently a large barge

Any idea on prices of them?

and what commodore model?