mx83 LOWER CONTROL ARM INTO 23/28's for neg camber?

[IN 05 NT]

hey guys,

been doing a lil bit of research,

theres been a few hints that MX83 LCA fit into the 23/28's and give 3degrees neg camber

can anyone confirm this? and does the sawy bar fit up fine?

as the missus now does night shifts, i dont get a chance to put the cressi n the celiac up against each other to match.....

cheers, blake

[Hen]

I really doubt things would fit.

From the top of my head I'd say that the MX83 LCA will have a bigger balljoint than the Celica steering arm (they're definitely different balljoints), so they wont match.

And the Cressida steering arm bolt spacing will be too wide for the Celica strut (plus I'd guess the Cressida steering arms are uber-long anyway), so it wont work that way either.

Sigma LCA is a better option. Or Corona if you don't want to go that extreme.

Hen

[TA-022]

dude fit RNP already.

Use KE70 ... with std arms you get 1.2 left 1.5 right neg camber.

then do the ol sigma arms etc to get to 2-3 degree

[Gunna]

Hey mate,

I asked similar question too heres what i got told. http://www.toymods.net/forums/showthread.php?t=22987

Let me know what you find out cause im interested in doing the same thing.

Cheers, Craig...