Wheel tubbing: TA22 RA23

[Joshra23]

has anyone here mini tubbed their RA23 or TA22? if you have, i'd like some pics if you have any and i'd also like to know what troubles u had if any etc. Also who in sydney would people here recommend to do tub work? i know of a couple but im interested to see who else is around

cheers

[w810sc]

Turbo RG from the States, members rides thread
http://www.toymods.net/forums/showthread.php?t=4102

fonzy

[Pube]

This is my ra23 which I hope to finish off one day. Im going to ditch this setup however and install a rear clip.

[celicapain]

haha looks like alot like my 23

[Turbo RG]

When you find someone to do the work. Pay the extra cost that may come up with it. you will
be so much happier......my project has taken so long because I had to do alot of work
over.
I'm happy the way it looks. but it ha cost more than I wanted...

This is my ra23 which I hope to finish off one day. Im going to ditch this setup however and install a rear clip.

I have tried to keep up with this project. it been really hard to do.

Joshra23
in you have any question just ask
I do have alot of info on this subject.

I have made some changes on my car. I should have some updates soon
Karey

[Joshra23]

Turbo RG... mate thats lookin sweet, I'll be watching yours with interest.

Pube.. mate what size rims u running under yours? do you have any pics of the under side i'd like to see your rear end setup.

celicapain.. lol what are u doin buyin a car from frankghanistan? good old frankston..

[Pube]

Im not too sure what I will be using now as I will be building a dedicated drag car. To get street registered you cant go wider than 10". I have some 10" wide rims with I think 305 tyres and they fit nicely. Under the car is a bit of an issue, it gets a bit messy as you have to mount coilovers and I have a narrow 9" diff. The chassis is a bit narrow making it messy to mount the coilovers. The short upper trailing arm config I have predicted will slow me down so the only answer is a rear clip.