turbo oil restrictor

**celicapain** · 07-05-2007, 04:47 PM

howdy peoples
Now for something completly different.
Im putting a turbo on a six cylinder perkins, and i just need to know what size oil restrictor to run on the inlet to the turbo. the turbo is a T3 of an old saab, and the generator is running around 50psi of oil pressure when hot.
anybody know?

**Jonny Rochester** · 07-05-2007, 04:54 PM

Go the the garrett website and you can see the specs of each turbo. I think the full 50psi should be fine. If it starts leaking oil and blowing smoke you will have to go back to 35psi. I think the specs will say minimum 29psi when at full load, or something like that.

**celicapain** · 07-05-2007, 05:04 PM

cheerzs big earzs

**Negative Boost** · 07-05-2007, 06:22 PM

Check this thread. And in particular post number 18.

**feral4mr2** · 07-05-2007, 08:04 PM

^^ good article that (in post 18), never seen it before.

when i did my gte i filled the brass fitting that goes into the turbo with solder and drilled a 1.5mm hole in it. i think i seen the 1.5mm mentioned on various threads years ago in different forums.

**celicapain** · 08-05-2007, 05:24 PM

yeah, if i hadnt got any info i was gonna go ther 1.5 -i also picked up that size from somewhere(zoom?) but i wanted to confirm. its all done and running now, pushing 150Kva