???? toyota, repco , autobarn , mcdonalds , hungry jacks, the same places youd get cars parts from.
Guys/Gals,
Anyone know if and where I can get a new 3T-GTE Thermostat housing? My current item is perished and unusable.
Rob
???? toyota, repco , autobarn , mcdonalds , hungry jacks, the same places youd get cars parts from.
Only the shittiest of wines come in 5 litres
boosted 3rz hilux *new project* mwahaha
http://www.toymods.net/forums/showth...940#post134940
a 2t one will fit as well i think. most t variants are the same, albeit some at different angles.
I have spoke with toyota and they have no refrence of the part. Autobarn are just gay. I think I recall a while ago that Stewart Wilkins Motorsport had this item however it is no longer listed on the website.Originally Posted by BeRad
In addition to this would someone know the toyota part number so I can approch them again. It is definatly different then the 2T item as this does not accomodate cooling for the turbo additional fittings.
edit...sorry i was thinking of the top part.
try penrith toyota. they are jap import friendly
Well if all the 2T one is missing is the turbo feed and you cant get the 3T one then just get the 2T one and then get someone to weld a fitting onto it. Prob a better option especially if your gunna get reamed on a new one if you can find it.
- LeeRoy
Daily Driver: Red Ae93 Project: My TA22 - now with 3s-gteD is for Disco, E is for Dancing
also, where is it corroded? you can weld alloy. maybe you could repair the existing one???
The 2T one isn't for EFI engine therefore doesn't have the provision for Coolant temp sensor and the other plugs.
The mild steel outlets are all corroded but more improtantly the thing looks like crap!! I I am after something new as everything else in the engine bay is presentable
Why not make a custom one then?
- LeeRoy
Daily Driver: Red Ae93 Project: My TA22 - now with 3s-gteD is for Disco, E is for Dancing
And how may I do that?
What do all other 3T-GTE owners do??? Surley these parts are remaunfactued???
Well firstly its a shit looking part and it faces in the wrong direction - to the right. Mine is going to be adjusted ie cut and rewelded so it faces forward but if i had to make a new one id get a flange cut so its the same and bolts up then just get a thermostat housing of something else and weld that one. Then all you need to do is get some fittings put on and your set.
- LeeRoy
Daily Driver: Red Ae93 Project: My TA22 - now with 3s-gteD is for Disco, E is for Dancing
thermostat doesn't have any part numbers on it, i have one if you can't find a brand new one
Previous Rides: JZA80, GA70 GT, RA63 GT x2, TA61 GT, TA63.
i have a 2T-G efi one with 3 holes for the temp sensors, i posted up in the wanted section for a carby version with only one sensor hole so if you have one we could swap (if 2T-G fits 3T-GTE).
fonzy
deepdishfactory
2T-G - Half the valves but twice the fun.
Pics would be great!!
Rob
[email protected]
Previous Rides: JZA80, GA70 GT, RA63 GT x2, TA61 GT, TA63.
Bookmarks