Page 2 of 2 FirstFirst 12
Results 16 to 26 of 26

Thread: sump dent

  1. #16
    ......... Carport Converter jeffro ra28's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    1,535

    Default Re: sump dent

    nothing unsafe about welding on the outside of a sump full of oil i cant imagine Just make very short tacks, no long deep penetrations

  2. #17
    Junior Member Carport Converter Dale's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    1,914

    Default Re: sump dent

    Quote Originally Posted by IN 05 NT
    couldnt see why not?
    I was thinking the heat from welding could cause the oil to ignite, although I guess it's unlikely as there shouldn't be any/much oxygen in the sump to allow it to burn
    I am the sun

  3. #18
    Forum Member 1st year Apprentice
    Join Date
    Oct 2006
    Location
    south australia
    Posts
    7

    Default Re: sump dent

    thats the dent not sure if its anything to worry about

  4. #19
    ......... Carport Converter jeffro ra28's Avatar
    Join Date
    Oct 2005
    Location
    NSW
    Posts
    1,535

    Default Re: sump dent

    that shouldnt worry you, the oil pickup will be in the middle of the sump anyhow, it shouldnt affect anything and oil will still be allowd to flow freely across the suction of the pickup.

    Unless it gets dented agen and puts a hole in it!

  5. #20
    Junior Member Grease Monkey Adrian's Avatar
    Join Date
    Apr 2007
    Location
    W.A
    Posts
    81

    Default Re: sump dent

    looks like u got a leek from the sump gasket @ the front, could be old n not cleaned off or mabie driping down from some ware else.

  6. #21
    Forum Member 1st year Apprentice
    Join Date
    Oct 2006
    Location
    south australia
    Posts
    7

    Default Re: sump dent

    yea thats old oil not cleaned from oil leak form the oil filter

  7. #22
    Junior Member Grease Monkey Adrian's Avatar
    Join Date
    Apr 2007
    Location
    W.A
    Posts
    81

    Default Re: sump dent

    fair enuf lol

  8. #23
    Toymods Club Member Too Much Toyota TooF's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    5,741

    Default Re: sump dent

    for that dent id almost not worry about fixing it.

  9. #24
    ---------HO00NS---------- Chief Engine Builder IN 05 NT's Avatar
    Join Date
    Dec 2005
    Location
    nsw
    Posts
    3,495

    Default Re: sump dent

    BAHAHAHA thats the dent? lol......i wouldnt have looked twice at that..........

    you should see the MESS of a sump thats on our rally basher VP commy, lol.... i thought you were ytalking more like that,...........messed up!

    yeah dont touch that.....not doing anyharm

  10. #25
    Junior Member Backyard Mechanic pisso001's Avatar
    Join Date
    Dec 2006
    Location
    NSW
    Posts
    345

    Default Re: sump dent

    Once when i was quite young in my old VN commo i took it jumping. Seemed fun at the time.. After a while i got a bit confident and went faster and faster till the car bottomed out on landing and some how pulled the sump plug out... That affected me a little... Just a little usless sump story for you

    lots of sumps have a bump like that...

    Cheers,

    Pisso.

  11. #26
    Kamber King Conversion King Negative Boost's Avatar
    Join Date
    Oct 2005
    Location
    Sydney
    Posts
    2,158

    Default Re: sump dent

    Quote Originally Posted by Vios-GT_07
    as improperly replaced sump tends to leak especially under pressure...
    Something else is wrong if you have pressure in your crankcase!

Similar Threads

  1. Cressida MX73 Conversions Guide Book
    By twentyEight in forum Engine & Driveline Conversions
    Replies: 12
    Last Post: 24-02-2007, 11:07 AM
  2. Sump position model guide (SPG#)
    By ed in forum Tech and Conversions
    Replies: 10
    Last Post: 31-01-2006, 02:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •