I've got two F LSDs kicking around (not counting busted ones!), but I suspect they're both pretty tired. For that matter, I expect that any you find are probably fairly tired by now.
I'll second that. I ordered one recently from Rabidchimp and their service was excellent. The guy's name i dealt with was Aaron. Total was $758 AU including full insurance and snail mail shipping (4-6 weeks).Originally Posted by JustCallMeFrank
Eddie.
4agte finally completed. 234rwkw @ 8125rpm. Tis fun
I've got two F LSDs kicking around (not counting busted ones!), but I suspect they're both pretty tired. For that matter, I expect that any you find are probably fairly tired by now.
True trak in Crown = awsome skids.
ST177 UZS131 Crown Royal 'G' the pimping limo like daily 1UZFE 144rwkw
DST17T MS53 68 Crown Custom Wagon 7MGTE 266rwkw
the part number of side carrier bearings for the TRU TRAC ,,Has any body tried getting them from a bearing place ? from what i can work out they are 50x80 mm .. i did some searching and found a Nachi bearing .. but i am not sure on the specsTapered Roller Bearings
Bearing No: NACHI E32010J - Metric series
Dimensions
d = 50
D = 80
B = 20
T = 20
C = 15.5
a = 1.9
da(min) = 56
db(max) = 55
Da(min) = 72
Db(min) = 77
S1(min) = 4
S2(min) = 4.5
Cone ra(max) = 1
Cup ra(max) = 1
Mass = 0.37
Basic Dynamic Load Rating Cr: 62000
Basic Static Load Rating Cor: 90500
Limiting Speed - Grease Lubrication: 4400
Limiting Speed - Oil Lubrication 6000
Originally Posted by RA65 Sleeka
the truetrac is a torsen.Although probably better design then the toyota factory units.
http://www.tractech.com/Products.htm
72 RA21, 77 RA29, 78 RA40, 79 RA42, 83 RA65c, 85 RN60
81 RA42 race car, 04 F150 supercab tow rig.
I believe Truetrac and Detroit Locker are the same company, so I think you'll find you can either get a torsen LSD or a locker to suit most cars from Truetrac.
But the ones most people are getting from these forums seem to be the torsen variety. I know mine is.
The Truetrac is their Torsen diff. They also make a locker. The company that makes them is called Tractech (?).
Teh UZA80 - Project Century - Remotely p00'd by association
I got a detroit locker sticker with my True Trak
I was in the first group buy that 82MKII organised
I think I used the natchi bearing not sure though
ST177 UZS131 Crown Royal 'G' the pimping limo like daily 1UZFE 144rwkw
DST17T MS53 68 Crown Custom Wagon 7MGTE 266rwkw
OK, I'm looking into where to buy a TrueTrac.
Anyone found a place in AUS that stocks them?
Rabidchimp.com are ~500US + shipping.
Cheers
Wilbo
Im looking at getting one aswell for an MX73, I was thinking of Rabidchimp aswell because you get the carrier bearings aswell yeh? I would do a group buy with ya but we would probably lose out on the customs fees![]()
http://www.toymods.net/forums/showth...ruetrac+torsen
i have a feeling there would be quiet a few people keen on getting one so a group buy might be in order?
hello
Originally Posted by brett_celicacoupe
yep yep yep, count me in![]()
beer me!
Me tooAny idea how much it is for the carrier bearings if you just get the centre on its own?
im keen but need a G series one
KE38 - 2TG
MS65 - 1UZ
Hi All.
Has anyone or will anyone have an F series LSD diff centre left over as
the result of the upgrade, as I am after one.
Thks
Chris.
Bookmarks