AE92 and 4AGE Masses
From a recent conversion I've done I decided to note down all the masses I had measured, rounded up to the nearest 0.5kg (most weights were very close to the nearest 0.5kg anyway). So for all those interested for weight calc purposes here's what I have:
4AGE Smallport Engine Block Assembly
(pistons, rods, crank installed only)
Dry weight
= 52.5 kg
C52 non-LSD Dry Weight
= 25 kg
ND Reduction type starter
= 5 kg
Bosch 4AFE conventional type starter
= 6 kg
4AGE Smallport AE92 cast exhaust headers
= 7 kg ******check
4AGE Silvertop AE101 tubular headers
= 5 kg ******check
4AGE Smallport Manifold
= 5 kg
4AGE Bigport Manifold minus TVIS
= 5.5 kg
AE92 Subframe with stabliser block
= 9 kg
AE92 Control arm with bushes installed & swaybar
= 5.5 kg
4AGE Smallport Flywheel
= 7.5 kg
If I find more I will add it.
Last edited by Talasas; 14-03-2007 at 11:57 PM.
"In the beginning, the universe was created. This has made a lot of people angry and has widely been regarded as a bad move." -HHGG
Re: AE92 and 4AGE Masses
Good work Dave
1987 AW11 MR2 Supercharger (4AGZE)
1974 TA22 Celica (2TG bored and stroked)
Thanks to James Cameron's Terminator films, we know that robots are stronger, faster, tougher and more Austrian than the rest of us.
Posting Permissions
Reply With Quote
Bookmarks