1GGTE clutch

[Sparkystav]

Hi all,

I'm trying to find an uprated clutch for my 1ggte.

I've found the post showing the hilux one fits, but that doesn't seem to hold it.

From my research I think a 3sgte clutch will fit but can anyone confirm or deny this?

Thanks!

[Shakotan_Aaron]

Compare sizes, does it run a 225mm or 236mm?

[Sparkystav]

236mm for both, I'm pretty sure the f iction plate fits,

It's the bolt holes for the pressure plate, I've taken the plunge now and ordered one so I'll update the thread when I know!

[Shakotan_Aaron]

Was going to say there is a good chance 2jzge and 7mge will work.

[Sparkystav]

Was going to say there is a good chance 2jzge and 7mge will work.

7m doesn't fit tried that

[Sparkystav]

Right to close this out.

I can confirm the 3sgte clutch pressure plate and friction plate fit the gen3 1ggte flywheel. Opens up a whole new world of clutches for the 1ggte.

[kamal]

i'm glad you did the research i was facing the same problem

[Sparkystav]

Glad I could help someone.

Obviously it depends on your gearbox as to the release bearing you need but I use the Lexus IS200 box and release bearing and it works well.


Fitted a 6 puck clutch and pressure plate and no slip seen at 355bhp/324lb/ft


Anyone know a safe rev limit for the 1ggte's?

[kamal]

i have the standard w58 that came with the 1ggte so i hope it works out well

[Sparkystav]

Let me know how you get on.

I can highly recommend cg motorsports