W58 Short shifter

[CrUZida]

I know Dallamar personally, and he just doesn't get on the web very often at all.

[sillycar chick]

omfg
im in
who
where
when
how
what we need
hows it done?
is it proper short shifter or does he just hack the stick down?

What he said

What they both said.

Ummmm me three!

[SIKTOY]

I know Dallamar personally, and he just doesn't get on the web very often at all.

Well tell him not to leave us hanging

[ViPeR_NiPPleX]

$100 i can justify... what type of design is this one?

I trust Andrew's word that Dallamar is alright

[Cuzzo]

Seems to cheap to be true.

Im guessing a spacer with the shifter cut shorter.

[CrUZida]

Spacer's don't work without extending the pivot point.

Hence my question way up the top about the thickness of the spacer.
Too thick or too thin and its not worth it.

[Negative Boost]

I know Dallamar personally, and he just doesn't get on the web very often at all.

Ah, thats good then, i take back my previous comments. Its nice to hear from someone like you Andrew that people can trust him.

[haison]

*holding breath*


...*going blue*

[Expeditious]

I'm keen on short shifter, ill take 2 pending more information.

[Farkurnell]

I'm in as well. If they're good.

[Kirsty2520]

I am going to be watching this thread and Dallamar's Rep.
Anyone that -reps him for not getting online when you want him to will be in serious trouble.

[dallamar]

Sorry for the delay guys, but have been doing a little more research - the one I have is a modified gear lever, but I am getting a heap made up from scratch. My current lift is 10mm, but am working on 25mm for the final product which should get the throw to about 4-5cm. I should have more details and pics early next week. As it is I can still get some modified, but only to the 10mm. I will post more next week.

[CrUZida]

Ed did a lot a research in to the best height to lift it too.

He found 16-18mm was the best to make a quick shift, without too notchy.

16mm is what I'm looking for.

[RONA]

Ed did a lot a research in to the best height to lift it too.

He found 16-18mm was the best to make a quick shift, without too notchy.

16mm is what I'm looking for.

Does Ed still have his CAD drawings or whatever for it, it'd make sense to just try and mass produce his considering its lasted the test of time .

[twentyEight]

Subscribed!