ke20/25 camber plates

**styler** · 30-12-2006, 07:43 PM

what amount of neg camber can be achieved?

also:
whiteline
noltec
t3
kmac

all make camber plates, any recommendation on brand or type?

**styler** · 30-12-2006, 08:25 PM

well seems that with stock springs, almost nil.
with smaller springs, eg coil overs maybe -1 deg total
depending on camber plate brand.

sooo probably going to go negative camber roll centre adjusters then,
as the ke20/25 had long control arms and there arent many suitable arms to swap with
past 335mm except mx62's at 360mm (unsure of balljoint interchangability though)

**oldcorollas** · 30-12-2006, 10:52 PM

umm, 10mm = approx 1 deg camber.
with my home made ones on KE1X, i get an extra 20mm of castor and camber (= 2deg of each)

how much camber do you need? how much space is there between spring and the panel? surely more than 10mm?

**Bananaman** · 30-12-2006, 11:44 PM

I'm currently have coilovers fitted to my r31 struts using t3 plates for my ke20, and i'm expecting considerably more than 1 deg, 1 deg will bring me back to standard as the kinpin angle of R31 is 1 deg more positive..

**turbo ke20** · 31-12-2006, 10:30 AM

im running ke55 control arms with celica struts and if anything i have a bit of postive camber

noltec make the adjustable camber top but they are $400 from memory.

u can always try a set of these adjustable control arms.

they will need a bit of wirk to get them to work 100%

pm me if interested but.

justin

**YLD-16L** · 31-12-2006, 04:11 PM

With my gheyer than aids K-Mac strut tops I have an incredible negative camber of 0'30" dialled in. That is as much as the camber tops will allow and this is running a coilover over setup too so I have an incredibly large amount of room to play with inside the strut tower.

K-Mac strut tops are a good strut top but not a good adjustable strut top, not on the early corollas anyway.

**Bananaman** · 01-01-2007, 11:56 AM

Originally Posted by turbo ke20

u can always try a set of these adjustable control arms.

I was under the impression that adjustable control arms were illegal (in NSW at least)?

0'30" is a bit disappointing for an adjustable top.. What is stock? I'll let you all know how i go with the T3 ones once they're in the car..

(On the note of T3 Shane, still no reply. I'll probably just ring him if it goes on much longer).