thanks, I assume thats also valid for their race series? I am going to find out how much they are worth
Dont you mean ring thickness of 1.5mm????Originally Posted by feral4mr2
300+rwkw 4agte http://www.toymods.org.au/forums/for...wkw-4agte.html
You need Mr Revhead from New Zealand, he can supply the correct Toyota HG.
As for all the other parts:
- Bearings - ACL Race
- Rings - ACL (proseal = iron rings i thought? C = chrome)
- Gaskets - TOYOTA
i recommend the toyota gaskets, especially for intake manifold, oil pump and rear main seal housing as these are the lovely metal gasket types. Most other gaskets you can make up from gasket paper (as suggested)... but if you are going to the bother of getting a genuine Toyota HG and valve stem seals etc, then why not just get a full gasket kit from toyota?
... again, contact Mr Revhead (search the forums)
...... butt scratcher?!
i knew what i meant.Originally Posted by 30psi 4agte
i've only seen the inlet manifold gaskets in the metal style from toyota karl... ?
yeah contact me! NEXT YEAR im on holiday
dont email me now, as im just gunna hit the big delte button when i get back
use the gasket to suit the head.
i can do a genuine headset for about $130nz delivered to you in oz.
as for bearings i can also do genuine. however ACL race should be ok. i personally dont recomend thier standard bearing range though.
and finaly yeah 20v rings are differnt from 16v rings, i can supply those too if needed.
after the 8th...
I have a stock 2005 model 1.3 Tazz which I want to modify to the 4age 20v silvertop - anyone done this or similar? I need all help I can get - not a oiled machanic yet!
I have made sure of the fit and some upgrades needed
Apparently the engine will fit on the existing mountings
Need to get special side shafts
Brakes I have already upgraded to RSi ventilated discs and calipers
Management system
Valve stem seals for 20V are different to 16V as the valve stem is smaller diameter (20V = 5m stem, 16V = 6mm stem).
Wollongong Sporting Car Club - Secretary
Current Cars:
2004 TW Magna VR-X AWD w/6G74 - Tow Car
1989 AW11 MR2 w/4A-GE 20V - Track Car
thanks guys, i will talk to you soon mr rev head, and yeah after a bit of digging and searching i found the valve stemseals were different
thanks all
heres the link for ACLs 20v part numbers
http://www.aclperformance.com.au/Toyota4A-GE4A-GEL.htm
Bookmarks