3tgte valves question

**sillycar chick** · 13-12-2006, 08:09 PM

Couldnt find a thread anywhere about 3tgte valves, after some aftermarket valves and springs...

2 questions:
1. Are 2T-G valves the same length as 3TGTE valves? I noticed the later injected 2TGs have the same diameter valves as the 3TGTE
2. Where can I get me some...?? Noticed paradise racing has stuff for 2T/3T.. again, this comes back to question 1..

Thanks people

**Jackel** · 13-12-2006, 09:03 PM

http://www.swmotorsport.com/

they have 18rg and 2tg maybe ask if they can get or make 3t-gteu ones

**sillycar chick** · 14-12-2006, 08:32 AM

Yeah, noticed they have stuff too.... but it still comes down to question 1 again...
Might send them an email like you suggested, just thought people on here might know

But +rep for you anyway

**The Witzl** · 14-12-2006, 09:40 AM

Performance Springs in brisbane - check the sponsors page

**sillycar chick** · 14-12-2006, 12:56 PM

Thanks Witzl, I cant rep you again, but your rep count is looking healthy anyway

Performance springs only have a listing for 3T stuff, but if anyone can confirm if 3tgte is the same would be a great help.

Oh and something else ive just considered, upgrading valves is probably a good idea due to the fact that I have to use unleaded anyway, what material valve would be suitable? Titanium i would think, but may be hard to find in this engine and expensive, other option is stainless steel. Opinions from people who are more familiar with the use of unleaded witih certain valve materials would be much appreciated.

**The Witzl** · 14-12-2006, 02:14 PM

no need to upgrade valves or valve material... japan has been using unleaded since 1976 - and where did your engine get released?

Just get normal valves... if you need to get valves at all.