Reply With Quoteone question
WHY???
if your going to wreak the 23 PM me i need front end bits thanks
1G RA23 to RA40 swap
Hay guys
I would like to know if my 1G-GTE and W58 out of my ra23 will bolt up into my ra40 I also need to know if the diff mounts are in the same position
Cheers
Ben
reputation is nothing knowledge is everything
RA23 1GGTE 12.3@110mph
1980 RA40 now getting a 1G with new picsLOOK
Don't argue with an IDIOT.He will bring you down to his level and then beat you with experience!
Re: 1G RA23 to RA40 swap
one question
WHY???
if your going to wreak the 23 PM me i need front end bits thanks
ThE wOrLd GoEs RoUnD n RoUnD nOt Up N dOwN
Daily 76' celica 1GGTE 1125kgs 13.7@ 91mph
NOS= ITS LIKE A HOT CHICK WITH STD's YOU WANT TO HIT IT BUT ARE SCARED OF THE CONSEQUENCES
whats the gee-ooo with every one having chicks in there avatars
1980RIP NATHAN BRETT DEAN2007,
Re: 1G RA23 to RA40 swap
engine crossmember is a straight swap.
with the gearbox, you can use the stock RA40 xmember. just turn it around (curving toward rear) and turn the rubber mount around.
RA40's have 2 gearbox mounting positions, the rear position allows you to bolt up the w58 withouht any mods at all, just do the things mentioned above
diff mounts are spaced further apart on the RA40 compared to the 23/28
hello
Re: 1G RA23 to RA40 swap
DQIKST
Not wrecking it out Im turning it into a burnout car (1UZFE)
Breet
Can I fit the diff still as the 23 has a hilux diff fitted but its 1410mm wide
reputation is nothing knowledge is everything
RA23 1GGTE 12.3@110mph
1980 RA40 now getting a 1G with new picsLOOK
Don't argue with an IDIOT.He will bring you down to his level and then beat you with experience!
Re: 1G RA23 to RA40 swap
Nah the diff mounting points are different.
Re: 1G RA23 to RA40 swap
Thats not the answer I was hoping forOriginally Posted by TurboRA28
Do you know how far out they are ??
reputation is nothing knowledge is everything
RA23 1GGTE 12.3@110mph
1980 RA40 now getting a 1G with new picsLOOK
Don't argue with an IDIOT.He will bring you down to his level and then beat you with experience!
Re: 1G RA23 to RA40 swap
nothing a grinder and some blue-tac cant fix
and maybe a welder if you want to make it strong
hello
Re: 1G RA23 to RA40 swap
Do you realy think ill need to weld itnothing a grinder and some blue-tac cant fix
and maybe a welder if you want to make it strong
Let there be rep
Cheers
Ben
reputation is nothing knowledge is everything
RA23 1GGTE 12.3@110mph
1980 RA40 now getting a 1G with new picsLOOK
Don't argue with an IDIOT.He will bring you down to his level and then beat you with experience!
Posting Permissions
Bookmarks