Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: 5M-GE to 7M-GE

  1. #1
    Forum Member 1st year Apprentice
    Join Date
    Nov 2006
    Location
    CA
    Posts
    13

    Default 5M-GE to 7M-GE

    what are some of the things that I need to buy to make this swap work?

  2. #2
    jzx100 fan boy Domestic Engineer slide86's Avatar
    Join Date
    Nov 2005
    Location
    south australia
    Posts
    680

    Default Re: 5M-GE to 7M-GE

    a 7mge engine
    Quote Originally Posted by The Witzl
    Please visit here, they will have all the answers you need for this "conversion" - www.hot4s.com.au

  3. #3
    Forum Member 1st year Apprentice
    Join Date
    Nov 2006
    Location
    CA
    Posts
    13

    Default Re: 5M-GE to 7M-GE

    ok. i have a complete motor. and ecu. other than a 7mge wiring harness, what else might i need to do the swap?

  4. #4
    Junior Member Conversion King whatthe?'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,754

    Default Re: 5M-GE to 7M-GE

    Engine, ECU and loom are the main things. The engine mounts will be a direct swap, the gearbox will bolts straight up and be in the right position if you use the 5M engine mounts. Should be a fairly straight forward thing, merging the engine loom into the car loom as required will be the only tricky bit. If the 5MGE shares the 5ME's AFM integrated fuel pump relay that'll be a bit of stuffing around as well, as you'll need to run fuel pump operation from the circuit opening relay, the 7M AFM doesnt operate the pump AFAIK
    Project megap00 - Gave up and sold up. Money tree died

  5. #5
    Rest in Peace Conversion King ViPeR_NiPPleX's Avatar
    Join Date
    Oct 2005
    Location
    VIC
    Posts
    2,183

    Default Re: 5M-GE to 7M-GE

    it does suprisingly! or atleast the late model mx83 7mge wire up I did recently had the same switch.

  6. #6
    Junior Member Conversion King whatthe?'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    2,754

    Default Re: 5M-GE to 7M-GE

    Well there you go. Should be a fairly simple swap then.

    Like my new sig James?
    Project megap00 - Gave up and sold up. Money tree died

  7. #7
    Rest in Peace Conversion King ViPeR_NiPPleX's Avatar
    Join Date
    Oct 2005
    Location
    VIC
    Posts
    2,183

    Default Re: 5M-GE to 7M-GE

    haha, so it seems both you and Hen both like men in the pants eh?

    Back on topic, why the desire to swap from 5m-ge to 7m-ge? I'm guessing the 5m is blown up or badly worn out?

  8. #8
    Forum Member 1st year Apprentice
    Join Date
    Nov 2006
    Location
    CA
    Posts
    13

    Default Re: 5M-GE to 7M-GE

    the 5m had 245,000mi on it and finally blew. I got the 7m for free from a buddy who's 87 was taken out in the rear by a drunk driver. the car only had 95,000 original miles.

  9. #9
    Junior Member Backyard Mechanic pAuL's Avatar
    Join Date
    Apr 2006
    Location
    NSW
    Posts
    255

    Default Re: 5M-GE to 7M-GE

    looking to join the BHG club?
    Current - 2006 Colt Ralliart 100.2FWKW@6000rpm,
    Past - 1988 Toyota Camry V6 (Sold) (VZV21) 117kw@5600rpm, 1994 Lancer Station Wagon Executive (sold) (86kW+@6000rpm), 1986 Corona S (sold) (73kW@4800rpm), 1990 Cressida GLX (BHG) (142kw@5600rpm)

  10. #10
    Junior Member Conversion King TheStitt's Avatar
    Join Date
    Jul 2005
    Location
    Act
    Posts
    2,735

    Default Re: 5M-GE to 7M-GE

    C you there!!!

    What sort of car is it going into??
    ST177 UZS131 Crown Royal 'G' the pimping limo like daily 1UZFE 144rwkw

    DST17T MS53 68 Crown Custom Wagon 7MGTE 266rwkw

  11. #11
    Junior Member Conversion King TheStitt's Avatar
    Join Date
    Jul 2005
    Location
    Act
    Posts
    2,735

    Default Re: 5M-GE to 7M-GE

    C you there!!!

    What sort of car is it going into??
    ST177 UZS131 Crown Royal 'G' the pimping limo like daily 1UZFE 144rwkw

    DST17T MS53 68 Crown Custom Wagon 7MGTE 266rwkw

  12. #12
    JZA61
    Guest

    Default Re: 5M-GE to 7M-GE

    how much u rekon a place like rolin wud charge for a 5m-e to 7mge conversion? if i supplied motor?

  13. #13
    Longs to be a Conversion King RObErT_RaTh's Avatar
    Join Date
    Mar 2006
    Location
    South Australia
    Posts
    2,505

    Default Re: 5M-GE to 7M-GE

    DIY mate, I've looked at prices for just swapping parts here and there and I don't know that much but I know I can bolt a few things on myself and save hundreds. I say give the conversion a shot (even though I haven't done one yet ) and then if you can't do it take it and pay someone or better yet I'm sure the toymods lads will help out for beer payment. They've offered it many times before.

  14. #14
    JZA61
    Guest

    Default Re: 5M-GE to 7M-GE

    i went to an impounded car auction today, there was a 6m-ge soarer there. it went for 360 or sumthing. way over priced! i weighed up the cost of buying a 7m-ge and getting it recoed to buying a 1j and getting them both installed with buy the same ppl, receipts and all. and its pretty much the same. so still weighing up the choices. i was close to buying the soarer for the 6m ge but i had to b very cuthoat and oversee the 6m-ge's "could be's" and focus on the "money wasting factor"

  15. #15
    Longs to be a Conversion King RObErT_RaTh's Avatar
    Join Date
    Mar 2006
    Location
    South Australia
    Posts
    2,505

    Default Re: 5M-GE to 7M-GE

    $360 too much? How come?

Similar Threads

  1. 7m and 1g injectors?
    By hypo23 in forum Tech and Conversions
    Replies: 21
    Last Post: 05-10-2006, 02:28 PM
  2. What box for 7M or 5M
    By Hokey in forum Tech and Conversions
    Replies: 7
    Last Post: 24-03-2006, 12:18 AM
  3. 6M and 7M differences???
    By fatboy13 in forum Tech and Conversions
    Replies: 11
    Last Post: 10-01-2006, 08:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •