You'd need a buzzer to remind you you're towing every now and then ...
i thought you said you'd never soil the mobile lounge-chair with such a pedestrian accessory?Originally Posted by Norbie
![]()
You'd need a buzzer to remind you you're towing every now and then ...
GTE23 - Accruing parts - Packed away in the farm container
UZA28 - Accruing parts - Packed away in the farm container
LN65 - Awaiting 1KZT dual transfer 4.88 electric locker transplant
YN65 - Drive car and cabin donor - ok fuckit 1UZ conversion
YN65 - Additional cabin donor - engineered bogan spec
You havent seen my RA40Originally Posted by MR 1JZ
Whats happening with the RA23 18RGTE project?? You cant just spend all your time working on straight line bullets, and none on the nimble beauty
Cheers, Owen
Cheers, Owen
1977 RA28 with 1JZ-GTE (Was 18R-GTE)
Lancer EVO Brakes into old Celica/Corolla/Corona
Doing the things that aren't popular... cause being popular and being good are often distinctly different.
The RA23 is sitting in a corner of the garage and is currently serving as a shelf while I wait for the uber-engine to be built. It is my intention to give it a bare-metal respray in the meantime but I can't see it happening for a while yet, too much other stuff going on!
Norbie!
www.norbie.net
Youll have to get an Altezza 6 speed for that to match the supra
Cheers, Owen
Cheers, Owen
1977 RA28 with 1JZ-GTE (Was 18R-GTE)
Lancer EVO Brakes into old Celica/Corolla/Corona
Doing the things that aren't popular... cause being popular and being good are often distinctly different.
LOL find me one with an R series bellhousing and I'll do it! Failing that a W58 will do me just fine.![]()
Norbie!
www.norbie.net
so your keeping your old W58 box.
make one... if bogans can be bothered making bellhousings to fit W50s to boat anchors, surely you can get an R series bellhousing, the altezza bellhousing, and put an aluminium fabricator to work making it fit.
Cheers, Owen
Cheers, Owen
1977 RA28 with 1JZ-GTE (Was 18R-GTE)
Lancer EVO Brakes into old Celica/Corolla/Corona
Doing the things that aren't popular... cause being popular and being good are often distinctly different.
No, my old W58 went to smashed-gearset heaven, I'll have to buy a new one.Originally Posted by Fish
As for bellhousing adapters, far too much effort/expense just to get another ratio. Remember the only reason I did the 6-speed swap for the Supra was the strength of the V160, not the extra ratio. No such incentive exists with the Celica.
Norbie!
www.norbie.net
The J160 has an integrated bellhousing... unless you meant cut the front of the J160 box off and weld on the front bit of the R bell.Originally Posted by o_man_ra23
Mos.
Admin, I.T., Founding Member, Toymods Car Club Inc.
2000 IS200 Sports Luxury 1UZ-FE VVTi, 1991 MX83 Grande 2JZ-GTE (sold)
Blasphemy! The 18RGTE will have such a broad torque band he'll only need two forward gears anyway!
GTE23 - Accruing parts - Packed away in the farm container
UZA28 - Accruing parts - Packed away in the farm container
LN65 - Awaiting 1KZT dual transfer 4.88 electric locker transplant
YN65 - Drive car and cabin donor - ok fuckit 1UZ conversion
YN65 - Additional cabin donor - engineered bogan spec
hmm,
i was looking at a albins gear set.
Esteban, you better not be suggesting bogan powerglide crap!! Even my brother's HQ with V8 bogan-ness is woeful with the powerglide, he wants 5 cogger.
6 gears will help the Celica to that magic 300kph mark
Cheers, Owen
Cheers, Owen
1977 RA28 with 1JZ-GTE (Was 18R-GTE)
Lancer EVO Brakes into old Celica/Corolla/Corona
Doing the things that aren't popular... cause being popular and being good are often distinctly different.
No bogan ultracrap inferred, just huuuge 18RGTE powah prowess...
GTE23 - Accruing parts - Packed away in the farm container
UZA28 - Accruing parts - Packed away in the farm container
LN65 - Awaiting 1KZT dual transfer 4.88 electric locker transplant
YN65 - Drive car and cabin donor - ok fuckit 1UZ conversion
YN65 - Additional cabin donor - engineered bogan spec
I had a go at butchering the interior bits to fit around the new tunnel and shifter, it's not great but it's good enough for now (note: I have low standards). With more work it could probably look a bit better but, you know, meh.
![]()
Norbie!
www.norbie.net
Bookmarks