[Guide] Corona/Peugot/Hilux Conversion with Height Adjustable Coilovers [56k DIAF]

[Smokey228]

Fair enuf. Well we are saving 40$ on shipping doing it together and 60$ on the upper hats cause they are charging 30$ each instead of 50...

Thats US, but doesnt mean much anymore... So im stil hapy to do it this way if you guys are... Im going to be making the order in about 45mins...

Cheers,
Jase

[twentyEight]

If it's not too late to add to the order, and it doesn't take it over the $1k mark (or something can't be worked out), then I would like to add a Strut Brace and a pair of RCAs to the list also...

So that's:

1 x Weld On Coilover Set - USD$199
1 x Adjustable Camber Plates (110mm Celica) - USD$180
1 x Swivel Upper Hat Set - USD$30
1 x Strut Brace (110mm Celica) - USD$119
1 x Roll Centre Adjuster Set - USD$80

Total USD$608 plus shipping.

Let me know if you wan't me to do my own order, or if there's any issues with above...

Cheers!

[Smokey228]

28, if you want the strut brace, you'll have to work something out with them direct. Last time i asked, they said shipping may be an issue...

I havent done the order yet cause i been flat out busy at work...
I wanna have a final request before i make it! Old school has confirmed just now...

Can you guys also PM me phone numbers, this is really hard otherwise lol

So i have;

3x Weld on Coilover Kit (Me, 28, Silly)
3x Camber tops (old, old, 28)
5x Swivel Hats (old, old, 28, me, silly)

28, if you wanna order seperately the email is; Gabriel & Gia Tyler [[email protected]]
I spose were not really saving that much, cause the swivel tops are 30$ with the sleeve or 50$ on their own. So its almost do difference...

But let me know asap...

Cheers,
Jase

P.s. For now, put a deposit down. I'll have to workout which exchange rate i will be billed at.

[Smokey228]

Okay,

I’ll make the order for;

3x Weld on Coil Over Kits (2” Tube diameter) + Spring rate of 375lb. I have rode in 450 and it seems a bit stiff for our roads 
3x Adjustable Camber tops (110mm Bolt Space{s13/ra23})
5x Swivel Hats (63.5mm Spring)

This is going to work out to $US1365. Are you able to put it down, for customs sake, as a gift or something worth less than $1000 so we don’t have to worry about taxes?

I’ll get you credit card details today.


Regards,

Jason

This is so much harder then i think it will end up being worth haha

Cheers,
Jase

[old_school_jap1]

my camber tops have to be the 100mm ones for my ta22

[Smokey228]

Thats okay, you have a PM...

Cheers,
Jase

[takai]

Welcome to the joys of organising large purchases guys.

GLHF.

[Smokey228]

Haha, this isnt to bad Hopefully we save a substantial amount doing it this way though...

P.s. 28, seeing as your in Vic, its probably going to cost about 10-15$ to get it to you, so it might just be easier to order yourself, and then get the extra bits you want... But let me know, i'll PM you my mobile...

Silly, your in SA, so same goes for you. I can ship through work and it'll probably cost about 10-15$ for sleeve kit and camber tops... Probably about the same to send only sleeves... I'll have to wait and get the actual weights...

Cheers,
Jase

[SillyCarS]

yeah sweet as mate

nice work with the customs comment too, im sure this would have been over looked

[twentyEight]

Hey Jase,

I think I'll put in a seperate order so that the strut brace doesn't add to everyone elses shipping costs... (In case I can get it shipped...)

Cheers for you help mate!

[SillyCarS]

you really are a shit bloke 28 (do one order and fix up the difference before it is split amongst the rest of us? {Ie. more work for Jase } )

[Smokey228]

Silly, between me and you, that 28 guy is pretty average

Nah that is cool man! I kinda prefer it to be a smidge under 1k so we can be certain it doesnt get fubared! But he has said they'll shit it in smaller boxes with low values!

I'll place the order now and hopefully we'll see them in a week or so Last time they stuffed something up, they shipped it on friday (thursday to them) and i received it on tuesday i think...

Cheers,
Jase

[Smokey228]

For me though;

2 x Weld on Coil Over Kits (2” Tube diameter{51mm}) + Spring rate of 375lb
2 x Adjustable Camber top pairs (110mm Bolt Space{s13/ra23})
4 x Swivel Hat pairs (suit 63.5mm Spring)

The final cost in US dollars should be, $US956

Everyone happy?

Cheers,
Jase

[SillyCarS]

kickin goals mate, well done on the 12.5 too!

[Smokey228]

Cheers man. Sig's been updated

Cheers,
Jase