5me valve clearance

[hairywally]

need the clearances for 5me , rockerarm to camshaft clearance actually

[ed]

i think its 0.010" on the exhaust and 0.008" on the intake from memory...

[thechuckster]

you set the gap in these motors between rocker arm and valve stem?

[hi-ace]

Ok, the inlet side is 0.28mm or 0.0110in ex side is 0.35mm or 0.0138in.
Measured between the valve stem & the rocker arm.
This is the correct settings as per the 5 ME engine manual.

[hairywally]

thanks guys, and for anyone else looking for this info, the 0.28mm EX and 0.35mm IN are for a hot engine.

thanks again