Pics needed: 1uz oil filter / air con fittement

[ed]

Ok folks...

im re routing the 1uz's oil outlet and return lines, and am making an adapter/fitment to bolt up to where the stock oil filter 'stalk' bolt up to the block/front engine cover.

the air con compressor sits right on top of this, but as i dont have an aircon unit at present, mocking things up so the fittings wont foul is a bit hard...

hence the need for pics

anything fron either the front or the side of the engine (in and/or out of the bay) showing the air con compressor and the oil filter and 'stalk' will be rewarded with much + reppage !!

cheers y'all
ed

[cambelt]

Also check the 2uz cruiser oil filter stalk , may suit you ?
Dave

[Mos]

Hi Ed,
Would these help?




Sorry, I don't really have any more that are relevant. Only a top frontal if you desire

Mos.

[ed]

hmmmmm TOIGHT!!!

[madmont]

Here are pics of a remote mounting i made for mine


and here is one someone else cobbled up

[joecoolmk2]

hey ed, i've got an aircon compressor if you want it. i won't be using it and nobody else in tas would want it, so i'm selling it cheap

[ed]

man, its still going to be close - im trying to fit x2 -12AN 45deg fittings into that space under the air con.

ive managed to get my hands on an aircon unit today (from perth) so hopefully ill be able to see exactly how she might line up.

those pics above are a little reassuring....

cheers!
ed

[ed]

ah man - ive already commited to a sale - cost me about $130

[joecoolmk2]

ah man - ive already commited to a sale - cost me about $130

oh bugger then. you could've had it for 50. let me know if anyone you know wants one.

[ed]

what model is it off?

[joecoolmk2]

celsior. i've been getting confoosed as to what the motor came from, because it had a different oil filter stalk. but it has the purple injectors so definately celsior.

[madmont]

Here is a picture of the engine end

[ed]

lol - you even machined in the o-ring mount!

sikaflex baby!

still - encouraging to see that my fittings will likely fit a-ok

[gianttomato]

Mine.

[bansheebuzz]

How much room do you have between the filter and chassis? In my hilux a z148 would not fit. I work next door to the John Deere dealership, so i went through there spin on filters. Was able to come up with a filter that would clear. I just have to take a bolt out of the idler arm to replace it, but i have a good 20mm clearance once the filter is spun on and bolt back in