SA63 AUTO to MAN help help

[tom]

Hey i need at part number for the clutch out of a 2sc (sa63) i got a ra60 and am puuting the manual in it, i will have to swap the bell housing over, anything else i need to know before doing it??
and will the pedal ass just bolt in?

Thanks

[wilbo666]

A few things that might help

www.toyodiy.com -> The Toyota EPC online

For the clutch, http://www.exedy.com.au/ should be able to give you a part number to go off...

A few things...

The RA60 front half of the tailshaft will be too short.

The clutch pedal will fit, as will the brake pedal.

The RA60 clutch hard line, soft line and clutch slave will be on the wrong side (SA63 needs passenger side) and hence won't be able to be used.

You'll need SA63 flywheel, clutch, pressure plate, clutch fork, bellhousing. And from memory you might need different length bolts to bolt the manual bellhousing up to the engine as opposed to the auto bellhousing?

Oh and the RA60 shifter position will be too far forward. RA60 has the most forward shifter position, SA63 has the most reward. Your RA60 position in an SA63 will sit very far forward. (RA60 on far left, SA63 on far right),



Cheers
Wilbo