Aftermarket ECU maps for 7MGTE

[ecko]

how will a adaptronic tune work on a haltech?

[MWP]

It wont.
Well... the ignition map could be manually copied across, but the fuel map could only be used as a rough reference.

[RyleyMA61]

yeah i was going to manually copy both figures for X load at X rpm, and then richen and retard the fuel and timing respectively to get it safe

just so i can drive 15 mins down the road to the dyno and get the thing started and running

[MWP]

Nope you wont be able to straight copy the values for the fuel map.
For the ignition map, yes, but not the fuel map.
The values mean pretty much nothing between different brands (and even types) of ECUs.

You need a proper Haltech base map.

[ecko]

well mine should siut then, motor is standard albut recently rebuilt, tune is for 7psi so should be fine only prob may be its a e6x not the e11

[RyleyMA61]

Nope you wont be able to straight copy the values for the fuel map.
For the ignition map, yes, but not the fuel map.
The values mean pretty much nothing between different brands (and even types) of ECUs.

You need a proper Haltech base map.

that's crazy, i didn't know that! i know the haltech has the values in mS, so I just assumed from there?

Thanks mate, good info

Ecko- Mine is prety much standard (bigger turbo, injectors, boost) so will be quite helpful. I'm pretty sure the E11v2 can import E6X maps!

Thanks all, rep given

[ecko]

just waiting for the cable to turn up mate should turn up today hopefully

[RyleyMA61]

that'd be awesome man thanks

[ecko]

didnt turn up soon hopefully

[ecko]

cable turned up but i cant get it the pc to communicate with the haltech,
halwin just stays in offline mode

[RyleyMA61]

hmmm thats a bit gay! what version of windows and halwin are you using? you might need some software thing to make the haltech software look at the usb port rather than serial, ie trick it... maybe ring haltech?

thanks though mate

can anyone tell me what tooth offset and trigger angle they are using for the stock 7m CPS?

[ecko]

using windows 7 but it should work

[stepan117]

Dont suppose you have a 8860 base map for a 4agze ?

[ecko]

nope,
but i cannot get halwon to talk to the haltech

[RyleyMA61]

that's really weird... i had trouble back in the day with an E6, i had to restart in msdos mode... don't think windows 7 and halwin wouild like that though haha

check com port - usb drivers, and what com port it is using?