1ggte ARP bolts

[sanchez]

Ok, i'm having some difficulty getting a part number for some ARP head studs and rod bolts. I've searched throughout the forum and the net and I've had no luck. The ARP catalogue also doesn't have a reference for them. Any help would be greatly appreciated

[millsi]

pm 6boost. i think he knows how to get hold of them.

[Forcefed6]

There are heap studs available, but they are not specifically for a 1GGTE. In order to fit then, the head needs some relieving around where the head bolts go.

Not sure what there is available for rod bolts, but surely there could be something to substiute them for.

[6BOOST]

I have discovered this week that the ARP head studs can be fitted without any machine work jamie, just drop them straight in. The only tricks needed are a deep 12mm 12 point socket, and you have to put the washers that go under the nuts on the head before you lower it down over the studs, or conversely, put the studs in through the washers after you've put the head on. I'd do option 1, takes all of 5 sec to put them in. Other than that, you don't need to do a thing. If anyone needs head or main studs, Jamie(Forcefed6) can suply them, I bought both my head and main studs from him, thanks jamie

As for rod bolts, I'm not sure. I didn't bother, I expect it to destroy the piston before the bolts, they are a fairly stout bit of kit as standard anyway.

6BOOST

[Forcefed6]

Ok.... Thanks for the heads up then..

[TTCorona]

So can any one help me out with the part number for these head studs that i will need for my 1G?

or someone who can help me get said studs delivered to me?
Also a cost if you have one handy.

Thanks
MaT

[hypo23]

2jz is your friend

[TTCorona]

Thanks mate.... but I have a 1G and intend on sticking with it....

Can I have useful answers please?

[hypo23]

2jz head studs from arp are wat you need.

[TTCorona]

hahahaha

apologies

Thanks for that!

[Forcefed6]

Actually it is 2JZ main studs.

I can help with them.

[TTCorona]

ok so what is the part number for the head studs?

[emp?]

yeah 2jz main studs for the main studs and headstuds in a 1g
ARP # 203-5405

[TTCorona]

Ahh i get it... so use the 2JZ main Studs for the 1G head studs?

Sweet

[emp?]

yep, and for the main studs as well
they work for both