1JZGTE Sump

[JZA70R_92]

Hello Guys


Is is possible to do the sump swap whilst in the car without removal of crossmember? and if I have to remove the cross member what can I use to hold the engine up that wont get in the way as the hoist bottem feet go under the car which sort of block the way plug I doubt I can get it high enough to remove the crossmember

[Z2TT]

You can use an engine hoist to hold the engine up the top, or you can use an engine support bar, that goes ontop of the engine bay, and stops the engine from falling.

You can build your own support bar or buy one.

http://stangfreak.com/_Image/HeaderI...er-Install.jpg

[JZA70 R]

Hello Guys
Is is possible to do the sump swap whilst in the car without removal of crossmember?

No.

[JZA70R_92]

hahah lucky when you have a hoist at this stage ill be pullin engine out again no biggy should be a 1 days work! lucky for me only things plumbed up is power steering lines and hydro fan which I aint happy with so give me a chance to tidy up pending rain stopping

[JZA70R_92]

this way is looking better and better might just jack car up as high as possible remove crossmember as I need to change it anyway as the one in the car is abit dogey where the rack mounts are. will give it a shot