Torque settings for 1JZGTE sump bolts?
Hey guys i've just had to fab up my own baffle for my 1j's sump and now that i'm putting everything back together, I need to know the torque settings on the bolts for the whole sump...
Have googled and searched here but found nothing useful...
Any help is appreciated, cheers!
Mitch
Re: Torque settings for 1JZGTE sump bolts?
Just run with 10-12nm for all your 6mm bolts and you can't go wrong, the only time you need to be more accurate than that is when you do internal engine components (bearings, main caps, cam caps etc). That's the standard figure that's in the front of the workshop manuals. I think they actuall say 10-14but 12nm at the most is plenty.
Aaron.
Re: Torque settings for 1JZGTE sump bolts?
Awesome cheers mate! Can always count on toymods
Re: Torque settings for 1JZGTE sump bolts?
the 10mm bolts that hold the pan to the sump are piss weak so be careful. ive managed to snap 2 just using a 1/4" ratchet with one hand. Ill be using stainless hex heads when the motor gets built.
JZA70|R / 12.45 @ 111 mph.
Re: Torque settings for 1JZGTE sump bolts?
Pick up just about any Toyota engine book and you will find a listing in the front or rear fly leaf for all torque setting, for different size and tensile strength bolts. Even my old '64 Crown book has the torque settings.Originally Posted by SGTLUX
cheers Chuck.
"What man can build, man can fix!"
UCF11 Celsior daily, RS56 Crown ute under construction, 2 x TA22's awaiting rebuilds. RS41 needs brakes!
Re: Torque settings for 1JZGTE sump bolts?
Indeed, I snapped a few on my 1G also.
Teh UZA80 - Project Century - Remotely p00'd by association
Re: Torque settings for 1JZGTE sump bolts?
Ok guys thanks heaps for the info! Sumps all together now and only needs power steering hose, clutch lines and tune then she'd all good to go!!
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote