ae92 4agze stock flywheel in my t50

[reecegze]

Hey guys i am just after the stock size of the earlier ae92 afm 4agze flywheel as its in my t50 gearbox and not konwing the previous history would it of been swapped to an n/a one to fit inside the t50 box ??? as i am having troubles trying to find the size of the t50 box

i am going to be using a 4a nite parts bellhousing so i am wanting to see if ive got a gze or ge flywheel ..

[feral4mr2]

if the bellhousing is the same size as a C52, then the gze flywheel/clutch will not fit with-out basterdising (<spelling?) either the bellhousing or outer edge of the flywheel/pressure plate with a grinder. (dont ask me how i know... ).

the clutch surface area is 224mm, i dont know off hand the total OD of the flywheel.

[reecegze]

sorry mate i had to edit it as i wasnt being specific enough

if the bellhousing is the same size as a C52, then the gze flywheel/clutch will not fit with-out basterdising (<spelling?) either the bellhousing or outer edge of the flywheel/pressure plate with a grinder. (dont ask me how i know... ).

the clutch surface area is 224mm, i dont know off hand the total OD of the flywheel.