+ Reply to Thread
Results 1 to 20 of 20

Thread: KONI or KYB AGX? advice needed,

  1. #1
    ---------HO00NS---------- Chief Engine Builder IN 05 NT's Avatar
    Join Date
    Dec 2005
    Location
    nsw
    Posts
    3,637

    Default KONI or KYB AGX? advice needed,

    hey guys,

    im in a bit of a pickle

    ive just ordered some KONI adjustable inserts for a SW20 mr2 rear's, (for the front of the celica in XT130 coilover setup, )

    BUT, theres NIL stock in AUS, and will have to come from HOLLAND, 6-8 WEEK WAIT!....

    they have KYB AGX adjustable in stock, theres only a $20 difference between the KYB and KONI....

    price is not the problem, im trying the get the car together and ready for Dubbo.

    so how do you guys rate the KYB AGX's compared to the KONI's?

    all advice and info appreciated

    cheers, Blake

  2. #2
    senior backyard mechanic Grease Monkey legend's Avatar
    Join Date
    Jan 2006
    Location
    nsw
    Posts
    147

    Default Re: KONI or KYB AGX? advice needed,

    koni thats it

  3. #3
    Toymods Board Member Conversion King Joshstix's Avatar
    Join Date
    Jul 2005
    Location
    NSW
    Posts
    2,112

    Default Re: KONI or KYB AGX? advice needed,

    The Koni's are far better from what I have heard. Try orderring them from www.twosrus.com, most people seem to get their gear in about a week from there.

  4. #4
    Junior Member Backyard Mechanic
    Join Date
    Feb 2006
    Location
    Tasmania
    Posts
    216

    Default Re: KONI or KYB AGX? advice needed,

    I have had both and I thought the KYB's were less harsh and easily adjustable. I don't think you lose anything by going KYB and I'm choosing those for my MX83 instead of Koni's.

  5. #5
    ---------HO00NS---------- Chief Engine Builder IN 05 NT's Avatar
    Join Date
    Dec 2005
    Location
    nsw
    Posts
    3,637

    Default Re: KONI or KYB AGX? advice needed,

    Quote Originally Posted by Joshstix
    The Koni's are far better from what I have heard. Try orderring them from www.twosrus.com, most people seem to get their gear in about a week from there.
    i'll have to get in contact with them!

  6. #6
    Forum Sponsor Carport Converter TurboRA28's Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    1,923

    Default Re: KONI or KYB AGX? advice needed,

    I've got KYB AGX in the front of the celica (sw20 like your plan) and Koni yellows in the rear.

    After 5000km or so the KYB are going great, easy to adjust, good range of adjustment. The koni's are making some bad noises. I'll be replacing them for KYB AGX in the near future.
    My vote is for the KYB.. But each to their own I might have just been unlucky.
    1977 RA28 Celica - 1MZ-FE Members Rides
    No other rides.. All sold.
    Email : joel_fitzgerald@hotmail.com

  7. #7
    ---------HO00NS---------- Chief Engine Builder IN 05 NT's Avatar
    Join Date
    Dec 2005
    Location
    nsw
    Posts
    3,637

    Default Re: KONI or KYB AGX? advice needed,

    im so stuck inbetween atm,

    i'll be doing some searching tonight, see what i can come up with, i honestly havent heard anything bad about the AGX, first hand,

    ive tried avery bloody susp stockist in NSW, and a few other around AUS, getting the same answers, 6-8 weeks

  8. #8
    Toymods member no 341 Domestic Engineer amichie's Avatar
    Join Date
    Dec 2005
    Location
    NSW
    Posts
    602

    Default Re: KONI or KYB AGX? advice needed,

    I bought a full set of koni's once. But after developing leaks within about 10,000kms I won't be buying konis again.

  9. #9
    Hachi Rusto Backyard Mechanic Julz01's Avatar
    Join Date
    Sep 2005
    Location
    Victoria
    Posts
    276

    Default Re: KONI or KYB AGX? advice needed,

    Ive got a set of kyb agx from a st185 to put into my ae86 struts chose them over the koni yellows for the fact that they are alot easier to adjust rather then having to compress the shock and then turn them , just easier to adjust from the top of the shock shaft.

  10. #10
    That's me before i was a Carport Converter -GT-'s Avatar
    Join Date
    Sep 2005
    Location
    NSW
    Posts
    1,993

    Default Re: KONI or KYB AGX? advice needed,

    I've had my koni reds for a few years now, absolutely love them, and absolutely no issues whatsoever.

    Plenty of track days, several a year. Rate them as one of the best things i've done on the car. And they're externally adjustable, easy as. No kyb experience so you'll have to listen to other people's praise for them, and decide what's most important to you. With minimal price difference i'd be jumping at the koni's, but can you wait?
    AE93 SX 20V - My other car is a 2GR
    1:16.42 at Wakefield Park | 2:04.77 at Phillip Island
    Toymods Club Member

  11. #11
    Fuel Economy Warrior Carport Converter Vios-GT_07's Avatar
    Join Date
    Mar 2006
    Location
    WA
    Posts
    1,753

    Default Re: KONI or KYB AGX? advice needed,

    had konis for a bit over a year now... coupled with anti-sway bars and strut braces, makes the car handle a lot better than stock.. i'm using progressive rate springs with them

    with the leak issue, i've heard that some springs (stock or chopped) are not compatible with koni adjustables, but this is just what i've been told.. then again, nobody i know uses stock springs with them and never seen anyone of them leak (except from a smash, which rooted everything under the car)
    Research has shown child in front seat causes accidents, accident in back seat causes child

  12. #12
    Boobs!!! Automotive Encyclopaedia Stefan's Avatar
    Join Date
    Oct 2005
    Location
    TAS
    Posts
    824

    Default Re: KONI or KYB AGX? advice needed,

    I have those exact AGX inserts (rear SW20) in my coilovers. I rate them.

  13. #13
    DIY Bloodline Domestic Engineer Talasas's Avatar
    Join Date
    Dec 2005
    Location
    South Australia
    Posts
    561

    Default Re: KONI or KYB AGX? advice needed,

    If only they made AGX shocks for more models...
    "In the beginning, the universe was created. This has made a lot of people angry and has widely been regarded as a bad move." -HHGG

  14. #14
    Junior Member Backyard Mechanic
    Join Date
    Dec 2005
    Location
    AB
    Posts
    230

    Default Re: KONI or KYB AGX? advice needed,

    ive got koni yellows with intrax springs on aw11, im very happy so far (6months) its been said before but its sure nice to be able to adjust so easily.
    Quote Originally Posted by merc-blue
    Cheap tools take all the fun out of working on a car.
    My Rebuild and Conversion.... '81 Tercel 3A -> 4A-GE 20 Valve - ON HOLD.
    BAD ASS 1986 MR2 - Finally Moving forward.

  15. #15
    Forum Sponsor Conversion King
    Join Date
    Dec 2006
    Location
    NSW
    Posts
    2,635

    Default Re: KONI or KYB AGX? advice needed,

    id be going for koni,

    what about the bump and rebound adjustable version? like MWP has?

    call topper performance in melb, they will be able to sort you out for sure.

    you going to dyno day? let me know if your not coz ill make the calls next week to sort it all for you. fuknsobusyfukn

    cheers
    linden
    Quote Originally Posted by WHITCHY
    Prefer someone around the Sydney area but will travel a few hours for a good box!

  16. #16
    ---------HO00NS---------- Chief Engine Builder IN 05 NT's Avatar
    Join Date
    Dec 2005
    Location
    nsw
    Posts
    3,637

    Default Re: KONI or KYB AGX? advice needed,

    yeah i'll be at dyno day, run the BHG 7m powah

    i'll call topper performance now,

  17. #17
    ---------HO00NS---------- Chief Engine Builder IN 05 NT's Avatar
    Join Date
    Dec 2005
    Location
    nsw
    Posts
    3,637

    Default Re: KONI or KYB AGX? advice needed,

    ok, cant find toppers number,

  18. #18
    ---------HO00NS---------- Chief Engine Builder IN 05 NT's Avatar
    Join Date
    Dec 2005
    Location
    nsw
    Posts
    3,637

    Default Re: KONI or KYB AGX? advice needed,

    well. i ordered the KYB AGX, if there is a pair somewhere in aus they were atleast an extra $100 ontop of what i could get em from elsewhere, \

    i'll keep you guys updated, if i have any trouble with them

    blake

  19. #19
    Junior Member Domestic Engineer Alex's Avatar
    Join Date
    Aug 2006
    Location
    vic
    Posts
    532

    Default Re: KONI or KYB AGX? advice needed,

    Quote Originally Posted by IN 05 NT
    ok, cant find toppers number,

    Probably a bit late, the spelling of there name usually makes it a little hard to track them down

    http://www.toperformance.com.au/index2.html

    (03) 9873 1722
    Quote Originally Posted by TooF View Post
    ha feburary!!! i im aiming for skids oclock in december.
    MY 87 ADM AW11 mr2. Now with previa sc14! http://www.toymods.net/forums/showthread.php?t=39380

  20. #20
    GT4 Insane Backyard Mechanic 1gt48u's Avatar
    Join Date
    Sep 2005
    Location
    nsw
    Posts
    241

    Default Re: KONI or KYB AGX? advice needed,

    koni you'll find have better valving., generally teflon seals, are fully rebuildable
    and or can be re valved to suit your needs

    kyb are good, but are not as versatile.

    horses for courses

    cheers
    Troy

    ST185 GT4

Similar Threads

  1. Aftermarket 2-Way/1.5Way LSD...Advice Needed
    By Toyo Truck in forum Tech and Conversions
    Replies: 38
    Last Post: 18-12-2007, 09:59 PM
  2. advice needed on suitable engine for ta22
    By TommyD in forum Tech and Conversions
    Replies: 12
    Last Post: 19-06-2006, 07:26 PM
  3. malpassi rrFPR - install advice needed
    By thechuckster in forum Tech and Conversions
    Replies: 4
    Last Post: 07-02-2006, 06:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts