MX83 Undercar Bush Kits ???

[slydin-cressy-style]

Hi guys

Im just wondering if anyone knows of a place where i can get an entire undercar bush kit for an MX83 Cressida?

Doesnt have to be urethane even though it would be great if they were availible

Im looking at replacing all the bushes under my car

Josh

[LeeRoy]

Super Pro probably make most if not all of the bushes for what you want. Nolathane is a brand of bush btw. They are actually a urethane bush as are Super Pro. There was also a thread on the Nolathane bushes disintegrating and not lasting a very long time. The Super Pro bush was also recomended as being a superior bush.

[The Real Roadrunner]

i dont think you can get super pro for mx83 (they may have a couple but not all) you will probly have to send Fulcrum (QLD) the orig ones and get them custom made.

cheers
linden

[Gavatron]

Linden's right. SuperPro only make a couple of bushes. I think it was radius rod and swaybar, not sure though.

You can probably still get all parts through Toyota. Bit exxy though.

[mrshin]

I used the SuperPro (or was it Noltec?) radius rod bush, used generic sway bar bushes, and made the front lower arm ones. Rears also seem a bit hard to come by, they are also for MA70s etc.

[amichie]

Don't waste your money on urathane bushes for anything other than sway bar bushes.
Genuine rubber is a far superior bush and it wont damage any suspension components.

[gtz1]

check with your local dealer you will find that they are all avaible in aust except for the rear suspesion member bushs that hold the unit to the body they are ex japan i have just sourced them all for a mate

[chris davey]

back from the dead.

Have to change the front radius rod bushes in my mx83 Cressida. Have rung the local suppliers around here that do Nolethane, Noltec and Super Pro and it appears that no one makes them.

Here is 2 pics of what I have. Just checking if I only need the piece in the first pic or are you supposed to get the whole bush assemble out of the chassis? If so, how the hell do you do that?
Thanks
Chris

[Gavatron]

Takai's guide on www.toyotacressida.net

http://forums.toyotacressida.net/for...ght=radius+rod

Also, SuperPro definitely do make them. Ordered some not long ago.

From the SuperPro online catalogue:
Part Number: SPF1324K
Location Description: Strut Bar To Chassis Mount Bushing
Important Instructions: Re use original washers
Number of Kits Required Per Vehicle: 1
Single Kit Contents: 4 Bushings, 2 Inner Tubes
Suspension Location Applied To: Front

[PlacentaJuan]

those things are a fucking **** to do, i did them a few months back.

if you need any help let me know, but maybe you are smarter than me.

[chris davey]

Hmm...not looking forward to it. I have never done these type of bushes on any car so I know SFA!