help needed on CT26 Identication, Ceramic or Steel

[CHB]

i'm planning to purchase one used CT26 turbo. the seller claim that its taken from a 7M-GTE. the exhaust housing has a single entry. how can i make sure that it is steel bladed exhaust wheel or its a ceramic type? any other methods to ensure that CT26 is a steel wheel turbine wheel?

[Admiral coFF33]

im i wrong in saying that they all are steel wheel .....

[CHB]

but there are CT26 which is ceramic exhaust wheel right? please correct me if i m wrong.
or does it means the twin entry exhaust housing CT26 all are ceramic wheel where as the single entry CT26 is steel wheel?

[Admiral coFF33]

well 7MGTE are all steel , and as far as i know the difference between 3s and 7M ct's are the size of the exhaust housing and the fact the 3s one is twin entry...

both are steel i think

[BigWorm]

I always thought they were all steel turbines, not that I took much notice of
prehistoric turbos (Garrett GT series FTW).
Easiest way to tell, take along a magnet.

[TurboRA28]

CT26 from 3sgte twin entry was ceramic..

7mgte ct26 single entry was steel..

Hmm magnet... not sure? I tried that once on a steel turbine wheel and it didn't stick. Someone said the metals used in exhaust wheels are not magnetic.. But that may be gospel.

[rob1]

ct26 off deisel cruiser is ceramic i think but other than that identicle to supra ct26. don't quote me on that though. i know they aren't twin entry.

[Norbie]

As above, if it's really a 7M turbo it will have a steel turbine. If you don't trust the seller though, the only way to be sure is to eyeball the turbo for yourself - it's pretty easy to spot the difference.

[tooch]

CT26 from 3sgte twin entry was ceramic..

Only the JDM ones. All ADM and Group A ST185's were steel wheeled.

[CHB]

confirmed that it has a steel wheel for that CT26A. now its in my garage.. thanks for the tips.. cheers...

[JZA70 R]

magnet wont work, when they say steel wheel, its actually a steel composite. hence non magnetic.

youd be amazed how many people try sticking magnets to them.. me for one. lol.

[88FOUR]

Is that right....B Rad told me to do that with one i had, .I am sure now it was a steel wheel. But needed reconditioning, and may aswell high flow which came to near 2 grand...Jordan has it now actually....(alls good I got a steely now too).....

[whatthe?]

BTW, not all 7M CT26s are steel wheeled. When stitty had his rebuilt in order to clip the turbine blades they had to replace the ceramic wheel for a steel one

[rob1]

yeah, a cheap replacement for a busted 7m turb was to get a cruiser one which is ceramic wheeled. they are no different exept for the ceramic wheel, and if you are running stock boost will work as well.