check the members rides section, there are 2 or more RWD 3S's i can think of off the top of my head.
better to read thru there first which will give you a basic understanding and ask the more technical Qs later.
cheers
linden
alright people how is it going
My toy car is an Ae86, I had been planning on A 200bhp 16v 4a-ge but I have decided it will be to high strung to be used as a drift and road car, so I have decided I think to go down the route of the 3sgte conversion.
however finding any information on doing the actual conversion is proving difficult
I know I need the engine and a Hi-Lux axle other than that I do not know
Any help appreciated
because of a change of plan I will have my TRD cams up for sale some wild ones 11k rpm ones
Cheers
Last edited by The Big Yin; 24-07-2008 at 12:41 PM.
check the members rides section, there are 2 or more RWD 3S's i can think of off the top of my head.
better to read thru there first which will give you a basic understanding and ask the more technical Qs later.
cheers
linden
Originally Posted by WHITCHY
Ah where to start? Which Gen 3sgte are you going to use? I, II, III, or IV?
As a starter have a look at these threads and then see if you need to ask any more questions.
3SGTE AE86
3SGTE RA28
RWD 3SGTE baffled sump
I'll try to post some pics of my completed sump in that thread link tonight.
cheers for the links
will more than likely use the rev 3 engine, out of an Mr2 turbo
anyone have any updated links? the links above are broken
thanks
Bookmarks