Reply With Quotetime to rename the thread.....who has the most bling
i also point out that blue wins!
Re: I NEED PICTURES OF 1GGTE GEN3's
Shaddap....
Beige.... The new Black!!!
BLING BLING 1GGTE's .......SHOW OFF COMPETITION
time to rename the thread.....who has the most bling
i also point out that blue wins!
hello
Re: I NEED PICTURES OF 1GGTE GEN3's
lol, what sort of pics does he want?
shiny ones, or tech ones like mine? :S
MY RIDE, 2 Door LHD KE70 sedan with 1G HKS stroker: http://www.toymods.org.au/forums/showthread.php?t=51760
Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'
Bling
Originally Posted by love ke70
any pictures by the sounds of it
hello
Re: I NEED PICTURES OF 1GGTE GEN3's
lol, weird
MY RIDE, 2 Door LHD KE70 sedan with 1G HKS stroker: http://www.toymods.org.au/forums/showthread.php?t=51760
Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'
Re: I NEED PICTURES OF 1GGTE GEN3's
hey mate
cheers for the pics they wer very helpful and to answer your question on what type of pictures i want technical is good but its interesting to see what other people have done to these motors is that such a wierd thing
Last edited by RA60 KID; 07-07-2006 at 01:23 AM.
Re: I NEED PICTURES OF 1GGTE GEN3's
hey guys
thanks alot for all the intrest and help this is gonna make it alot easier for me to put my engine togeather now
as for the parts i need where do i start
all this is for a GEN3
wiring loom
water pump pulley
altinator
a radiator to fit a RA60 celica and a 1GGTE
the little piece of plastic cover thats off the bottom half of the timing cover
there black servo next to the throtle body on the plenum
the bracket that holds the boost pipe that comes out of the turbo's the top of the motor
3 inch dump pipe
twin plate clutch setup
if anyone has any of these parts pm me
cheers nathan
Last edited by RA60 KID; 11-07-2006 at 01:59 AM.
Re: I NEED PICTURES OF 1GGTE GEN3's
ok do you race/drift mallala much ?
Re: I NEED PICTURES OF 1GGTE GEN3's
I have loads of pics, but this is the only one that is uploaded....
When I got it
After a bit of polishing.....
Even more polished bits when I get it back together!!!!! Everything polishable has been polished! Block refinished in gloss black, polished Trust intercooler and hardpipes.... HKS bov (1G fitment with hardpipe) HKS metal headgasket, shot peened rods, full bottom end balancing, all rehoned and rebuilt with totally new seals and gaskets. Stock rebuilt turbos, and the management is looked after by a mines ECU, apexi SAFC-II and AVC-R. nothing radical, but it shouldn't hang about
but its in bits, and thanks to useless fucking lazy ****s in engineering shops, will be off the road for the rest of this show season
Right now I would take serious pleasure in maiming these people
Last edited by Karma Supra; 07-07-2006 at 03:18 AM.
Some kind of BMW
'97 Hilux Surf SSR-X LTD
..::VVTi 1UZ-FE::..
Re: I NEED PICTURES OF 1GGTE GEN3's
pm sent i have a few of those parts you after
i cant see wats so weird with those pics he never stated till a couple of posts ago wat sort of pics he was after, and what parts he was chasing, turned out not too bad a thread really in my opinion just goes too show the different ways people are setting up their 1g with turbo set ups ect, too how people are prettying them up
keep the pics coming i say, its good too see wat every ones doing with there 1gs
wheres grim boy? he should have some interesting and different pics too through up
Last edited by hypo23; 07-07-2006 at 07:52 AM.
cheers steve,
24 hours in a day, 24 beers in a case..................coincidence?
1ggte, 11.22 @122mph
Re: I NEED PICTURES OF 1GGTE GEN3's
ST141
Must.... avoid.... urge... to... upgrade... parts I haven't.... used.... yet.....
Re: I NEED PICTURES OF 1GGTE GEN3's
How soon do you need all this stuff? I'll have a Gen3 ECU and loom going cheap in a couple of months. Everything is all neat and tidy, and all you'd need is to knock up two plugs to match the ones i've got on the loom.
Teh UZA80 - Project Century - Remotely p00'd by association
Re: I NEED PICTURES OF 1GGTE GEN3's
hey mate nice motor did it cost much for the polished pipes??I have loads of pics, but this is the only one that is uploaded....
When I got it
After a bit of polishing.....
Even more polished bits when I get it back together!!!!! Everything polishable has been polished! Block refinished in gloss black, polished Trust intercooler and hardpipes.... HKS bov (1G fitment with hardpipe) HKS metal headgasket, shot peened rods, full bottom end balancing, all rehoned and rebuilt with totally new seals and gaskets. Stock rebuilt turbos, and the management is looked after by a mines ECU, apexi SAFC-II and AVC-R. nothing radical, but it shouldn't hang about
but its in bits, and thanks to useless fucking lazy ****s in engineering shops, will be off the road for the rest of this show season
Right now I would take serious pleasure in maiming these people
yea i hate it when stuff like that happens damn
cheers Nathan
Re: I NEED PICTURES OF 1GGTE GEN3's
if i havent found one by then sure cheers for the help
Re: I NEED PICTURES OF 1GGTE GEN3's
No worries, I've got a few of the other if you get stuck too.
Teh UZA80 - Project Century - Remotely p00'd by association
Posting Permissions
Bookmarks