Nissan Z31T hubs are rumoured to fit.
I have a set, but yet to rip the arse end out of my car and see how they go.
Other then that, Mitsu. Starion rears might fit too.
But other then the MS123, no other rears have been proven to fit.
Following on from my successful "Are MS65 and MS75 hubs the same?" I though I would try my luck on the rear 5 stud conversion.
Given that I'm in NZ, are there other jap spec models that also run the appropriate 5 stud hubs, possibly a GS12X equivalent or something like that? I have a few different people looking for me and confirmation on this would be a great help.
Callum
PS - thanks to the previous threadI acquired a set of MS75 hubs, then found a set of MS65 as well.
Nissan Z31T hubs are rumoured to fit.
I have a set, but yet to rip the arse end out of my car and see how they go.
Other then that, Mitsu. Starion rears might fit too.
But other then the MS123, no other rears have been proven to fit.
I would imagine that GS12x would have the same basic running gear as MS123, being the same chassis and all. Very good chance the hubs are the same.Originally Posted by WDE_BDY
Norbie!
www.norbie.net
Yeah Norbie, thats what I assumed but was hoping someone could confirm for me. Don't want to buy GS12X hubs to find they don't fit. May have to try getting my EPC running on the new computer to see if the part numbers match.
Callum
According to my Toyota source, the hub part number is shared between GS121, MS121, MS123 and MS125 for Jap and NZ spec. Hopefully that helps someone else out.
Callum
Bookmarks