Hi,
send me a message, i can help.
Im doing a Engine swap in my 1991 Toyota Cressida MX83. Just put in a 2jzge out of a 1994 Toyota Supra and need help with the wiring....
If anyone could tell me what wire goes where that would be great!!!!!!
ENGINE: 2JZ-GE AUTO ECU/HARNESS
TRANMISSION: W58
Honestly any help would be amazing like photos of the colours of wires and everything.....
Thanks you
Hi,
send me a message, i can help.
MX83 7MGE
Jealousy is a curse
Here are the colours of the wires and their functions on my MX83 GRANDE loom plugs from 7MGE motor to underdash plugs
White plug
yellow with brown spots___________ speedo speed sensor
brown _________________________ speedo speed sensor [make sure you earth this one]
yellow_________________________ temp sensor
black__________________________ tacho
yellow/blue _____________________ oil pressure switch
red/green [2] __________________ reverse
green__________________________ park
red ___________________________ neutral
blue___________________________ drive
light green______________________ 2
pink __________________________ L
Square grey plug
small black/white _______________ AC clutch
blue/red_______________________ FP diags
black/red _____________________ +B diags
red/black _____________________ 12v supply for speed sensor etc
big black______________________ nsw
big black/white _______________ nsw from start relay
light green ____________________ goes to purple/white in other grey plug
green with spots _______________ tccs diode
green/white ___________________ stop light switch
big black/yellow________________ power from ignition
small black/yellow _____________ solenoid 2 in transmission to cruise control ecu
green________________________ from airflow for circuit opening relay
black _______________________ from temp sensor on water inlet to start injector
Rectangular grey plug
pink__________ _______________ TE1 diags
brown/black __________________ earth
pink/green__________ _________ TE2 diags
grey________________________ VF1 diags
purple/white__________________ goes to pink. and light green in other grey plug
grey/green___________________ brown wire on abs sensor
pink/blue ____________________ grey wire on abs sensor
purple ______________________ blue wire on abs sensor
Wires from 94 model Supra 2JZGE motor to under dash loom plugs
black/orange__________________ +12v
blue/red _____________________ speed sensor
yellow _______________________ +12v
red__________________________ speed sensor
yellow /green__________________ alternator warning lamp
brown________________________ radiator temp?
black with spots _______________ air con
green/yellow __________________ air con
purple/white __________________ air con
green with silver spots __________ oil level
brown with silver spots__________ oil level
yellow/blue___________________ temp sensor
grey_________________________ trans indicator park
green/red_____________________ trans indicator drive
blue_________________________ trans indicator neutral
red/black_____________________ trans indicator reverse
black/white___________________ trans indicator neutral start
light green/red________________ trans indicator 2
green/black __________________ trans indicator L
green/red ____________ ______ plug near alternator
green/black __________________ plug near alternator
yellow/ black__________ _______ oil pressure switch
red with silver spots____________ from tps to cruise control
DIAGNOSTICS connector wires
blue ________________________ WA
pink________________________ TL
black/yellow__________________ AB
yellow/blue___________________ TE1
yellow ______________________ TS
blue/red_____________________ FP
black/white __________________ IG- tacho feed
Jealousy is a curse
So what wire goes to what?
To find out what wire goes to what you look at the wiring diagrams very carefully make notes and then put it all together
Jealousy is a curse
Bookmarks