Hi guys,
New member! I just replaced the blown A341E transmission in my 1993 UCF10 LS400 with a later model A341E from a 1995 UCF20.
Later model transmissions don't have SP1 sensor ports so now I have no speedo or cruise control. Other than this, the transmission is working great!
Is there a way I can tap into the SP2 signal to feed the speedometer?
Alternatively, there is a round indentation in the transmission casting where the sensor could go. Could I drill and tap that to insert the sensor? Perhaps the inner gears don't exist though in the later trans? Both transmissions were listed as 30-41LE.
Cheers,
Martin
I make speedo/tacho signal converters which can fix your problem
Or you can use parts from your old transmission to fit the 2nd sensor
USSR GAZ24 with 1UZ-FE VVTi (UCV24) http://www.toymods.org.au/forums/showthread.php?t=60301
Engine conversion is when you drive a shitbox which costs a whole LEXUS to own
Bookmarks