Hey guys im just finishing off a 4agze conversion in my ta22..

a long story short i basically sent my loom away to an auto sparky who makes easy wire 4agze looms for oldschool toyotas which ends up using 5 wires off the 4agze loom. these are supposed to wire into the cars ignition switch.. so i need some help identifying the wires on the ignition switch (auto electrics does my head in and i dont want to melt a loom and car is located way rural so calling out an auto sparky would cost big bucks!). Any help would be much appreciated!!!

Wiring instructions are as follows from the guy who did my 4agze loom:

on 4agze loom.. White- ignition feed, (Use 30a fuse) and wire into ignition switch.. what colour wire should i be looking for on the ignition switch?

on 4agze loom.. Small yellow- constant 12v feed use a 5a fuse, wire onto ignition switch.. also looking for the colour of this wire

on 4agze loom.. Black- starter feed (ecu signal only) no fuse, wire onto ignition switch.. again i need to track down the colour for this wire

on 4agze loom.. Large yellow- Alternator warning light trigger (earths warning light) pretty sure i can tack this one down myself but if anyone knows then fire away!

theres also a blue wire for the fuel pump but this is pretty self explanatory.

cheers - matt