4agze t50 sprinter box clutch

[jaczook]

Hi all

trying to understand what clutch kit to buy for a t50 sprinter box to a 4agze.

cheers

[Hen]

Jac,

The answer depends on what flywheel you have.

The clutch spline needs to suit the T50 input shaft. This is common to several other boxes, including the FWD NA 4AGE boxes.

The clutch plate diameter needs to suit the flywheel you are using. Generally the options are, depending on the diameter of the raised section on the flywheel:
200mm (from AE86 or AE82 4AGE) - AE86 or AE82 clutch kits will suit
212mm (from AE92 4AGE, or 20V, though these are slightly different design and lighter) - AE92 clutch kit will suit
224mm (common 4AGZE flywheel, it is funky with raised sections to bolt the pressure plate to) - Don't know what clutch will suit here.
230mm (rarer 4AGZE flywheel, also funky) - Again don't know what suits.

This is a rough guide, the 200-212 changeover may not have exactly coincided with 82-92 change for example.

But if you are really stuck, take the flywheel to a decent clutch place and talk to them. They can usually find off-the-shelf bits that will suit.