Results 1 to 12 of 12

Thread: 3SGTe into KE30

  1. #1
    Olde ****** Automotive Encyclopaedia ToDa30/4's Avatar
    Join Date
    Dec 2005
    Location
    south australia
    Posts
    1,092

    Default 3SGTe into KE30

    the KE is already prepped with all support needed,car has a W57 5 speed, i want to match the 3SGTE to it i think i need the following. right or wrong please
    • 2S companion plate
    • 2S bell housing ex. ST140/141 Corona rwd 1982-85 ,or SA63 celica
    • engine mounts we can make
    • 2C or 2S starter motor
    • 2S sump
    • 2S oil pick up
    • 3S flywheel with reverse ring gear to engage cog bevel
      • 3S GTE fork & release bearing
      • 2C pivot
      • slave cylinder ?
    i'm aware of the issues of oil drain to the inlet side of block & dizzi locale. what have u done
    Project ST215W 300 AWKW Killerwagg'ss .staring in the garage .soon
    ST185R 385 AWKW now SOLD ..Daily '89 Eunos Roadster.
    Project '75 KE30 37.4 RwKw PIMPster. doing it for Angela RIP 1964 - 2011

  2. #2
    Corolla Collecter Backyard Mechanic Trent-KE30's Avatar
    Join Date
    Oct 2005
    Location
    Victoria
    Posts
    203

    Default Re: 3SGTe into KE30

    3S in a 30 Series would be awesome!
    1977 Toyota Corolla KE30 1GGTE http://www.toymods.net/forums/showth...post7372821977

    1987 Ford Falcon XF S Pac

  3. #3
    Junior Member Grease Monkey KE25 RACER's Avatar
    Join Date
    May 2006
    Location
    nsw
    Posts
    45

    Default Re: 3SGTe into KE30

    There is a couple of ke25s with 3s engines running in imp prod racing this weekend at oran park, one is 3sge N/A and the other is 3sgte.Awesome cars and bloody quick! Def worth a look for any early rolla fan!

  4. #4
    Gobble, Gobble! Automotive Encyclopaedia mrshin's Avatar
    Join Date
    Nov 2005
    Location
    Montrose
    Posts
    1,154

    Default Re: 3SGTe into KE30

    Forget Aussie Corona bellhousings - you don't want to use a bogwarmer gearbox do you!

  5. #5
    Olde ****** Automotive Encyclopaedia ToDa30/4's Avatar
    Join Date
    Dec 2005
    Location
    south australia
    Posts
    1,092

    Default Re: 3SGTe into KE30

    Quote Originally Posted by mrshin
    Forget Aussie Corona bellhousings - you don't want to use a bogwarmer gearbox do you!
    ..OK need 3S to W57 bell housing
    Project ST215W 300 AWKW Killerwagg'ss .staring in the garage .soon
    ST185R 385 AWKW now SOLD ..Daily '89 Eunos Roadster.
    Project '75 KE30 37.4 RwKw PIMPster. doing it for Angela RIP 1964 - 2011

  6. #6
    Classic Not Plastic Domestic Engineer ace's Avatar
    Join Date
    Oct 2005
    Location
    SA
    Posts
    689

    Default Re: 3SGTe into KE30

    Search around a bit more first, you'll find that the bellhousing from a Y series engine (in a hiace or something) will do the job.
    My TA22
    Quote Originally Posted by gianttomato about new cars
    Yeah sure, it goes alright and it's got air conditioning, cup holders and automatic tampon removers, but where's the charm?

  7. #7
    Olde ****** Automotive Encyclopaedia ToDa30/4's Avatar
    Join Date
    Dec 2005
    Location
    south australia
    Posts
    1,092

    Default Re: 3SGTe into KE30

    found a 3s to w57 bellhousing . so that end is ok,saw it was talked about alot in old forums .anyone driving one now comp or street with pointers re install
    Project ST215W 300 AWKW Killerwagg'ss .staring in the garage .soon
    ST185R 385 AWKW now SOLD ..Daily '89 Eunos Roadster.
    Project '75 KE30 37.4 RwKw PIMPster. doing it for Angela RIP 1964 - 2011

  8. #8
    Forum Sponsor Carport Converter TurboRA28's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    1,916

    Default Re: 3SGTe into KE30

    Yeah Y series bellhousing is a good one to go for as it puts the starter and clutch on the inlet side of the engine. Leaves more room for turbo/dump pipe.

    I used a Y starter motor also with a spacer plate to get it to mesh correctly with the flywheel ring gear.

    Clutch fork, slave cylinder was all Y stuff.

    You need a double row spigot bearing and a thicker than standard clutch release bearing.
    1977 RA28 Celica - 1MZ-FE Members Rides
    1996 FZJ80 Landcruiser.
    Email : [email protected]

  9. #9
    Olde ****** Automotive Encyclopaedia ToDa30/4's Avatar
    Join Date
    Dec 2005
    Location
    south australia
    Posts
    1,092

    Default Re: 3SGTe into KE30

    this is what ive found, what came out with y housing ?
    Last edited by ToDa30/4; 17-06-2006 at 01:01 AM. Reason: not wanting to upset supra owners
    Project ST215W 300 AWKW Killerwagg'ss .staring in the garage .soon
    ST185R 385 AWKW now SOLD ..Daily '89 Eunos Roadster.
    Project '75 KE30 37.4 RwKw PIMPster. doing it for Angela RIP 1964 - 2011

  10. #10
    Senior Citizen Chief Engine Builder "Z" UTE's Avatar
    Join Date
    Nov 2005
    Location
    ACT
    Posts
    3,059

    Default Re: 3SGTe into KE30

    "Y" housing came in Tarago's Lite Aces, Hi Aces and HI Lux. They all bolted behind the 2Y and 3Y engines. The bellhousing will bolt up to a W55/W57, and W58 gearboxes.

    chers Chuck.

  11. #11
    Forum Sponsor Carport Converter TurboRA28's Avatar
    Join Date
    Sep 2005
    Location
    QLD
    Posts
    1,916

    Default Re: 3SGTe into KE30

    There is 1 hole that needs to be elongated that bolts to the block.. But that easy done.
    1977 RA28 Celica - 1MZ-FE Members Rides
    1996 FZJ80 Landcruiser.
    Email : [email protected]

  12. #12
    Junior Member Grease Monkey
    Join Date
    Dec 2005
    Location
    ACT
    Posts
    126

    Default Re: 3SGTe into KE30

    I have a winged/trapdoored sump and pickup that I might be able to part with depending on $$$, now moved to a dry sump setup so it is no longer required. PM me

    I can probably dig up the part number for the starter motor too.

    Cheers,
    Dave

Similar Threads

  1. To 3sgte or not to 3sgte
    By General_Bupkiss in forum Tech and Conversions
    Replies: 13
    Last Post: 23-03-2006, 04:23 PM
  2. 3sgte and 4agze standard weights?
    By Taxi>Maxi in forum Tech and Conversions
    Replies: 4
    Last Post: 20-03-2006, 06:55 AM
  3. 3sgze Vs 3sgte
    By NeoNasty in forum Tech and Conversions
    Replies: 41
    Last Post: 18-02-2006, 03:03 PM
  4. 3sge - 3sgte CAS - interchangable?
    By Steve M in forum Tech and Conversions
    Replies: 5
    Last Post: 20-12-2005, 08:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •