Hi,
I have an SC14 on a stock bigport 8.0:1, 4AGZE (with custom ECU). Its running 12 psi, with a custom cam combo, 60mm throttle, 2.75" pipework (overkill) . This setup gave 15psi on stock cams. I dyno'd it at 150rwhp before extractors, 2.5" exhaust, custom cams and much better fuel mapping. Now I'd estimate I have about 165rwhp. I need to dyno it again.
This boost is achieved with stock crank pulley and 120mm retro-fitted SC12 pulley onto the SC14. Don't know the SC outlet temp, but after my water to air the inlet air temp is usually around 40 degs C. I should get my thermocouple out and become horrified!
Cheers, Nick
Bookmarks