Remote oil filter setup for 20v

[KE25 RACER]

Has anyone seen of a remote oil filter setup for a 20v?
any info would be great!

[LeeRoy]

Methinks a 16v one is interchangable as both are 4a blocks

[KE25 RACER]

What is the difference between 20v and 16v oil filter setups?

[feral4mr2]

should be no difference.

[KE25 RACER]

Does the 16v have the 2 piece alloy housing that bolts to the block that the filter spins onto? (it sticks out about 6 inches from the side of the block)as this is right in the way of where i need to make the engine mount for my ke25 conversion.

[slide86]

you can get this sort of setup that i am using on my GZE. here is a photo of the adaptor that screws onto the block.




you will then get a remote housing that holds the oil filter that you can put in the desired location. this setup that i have is cheap and effective.

the brand is "earls" which is a holley company.

[KE25 RACER]

EXACTLY what i need! I will contact earls tomorow.
Thanks

[kingmick]

you can get this sort of setup that i am using on my GZE. here is a photo of the adaptor that screws onto the block.




you will then get a remote housing that holds the oil filter that you can put in the desired location. this setup that i have is cheap and effective.

the brand is "earls" which is a holley company.

thats one of my blocks!hahahahahahaha looks bloody the same!lol

[slide86]

what do you mean?

[feral4mr2]

Does the 16v have the 2 piece alloy housing that bolts to the block that the filter spins onto? (it sticks out about 6 inches from the side of the block)as this is right in the way of where i need to make the engine mount for my ke25 conversion.

indeed it does, they are the same.
what you can do if you do not want to run a remote set-up is remove the oil filter sandwhich plates and mount the oil filter directly to the block. free's up heaps of space.

[KE25 RACER]

Yeah i was looking to mount the filter direct on the block, but being a race car i can fit a larger filter this way.

[kingmick]

what do you mean?

twas a joke! the blocks look all the same!lol

[kingmick]

Yeah i was looking to mount the filter direct on the block, but being a race car i can fit a larger filter this way.

get a good filter like an oberge or system1 as when your racing it payes to keep broken bits right out.

[slide86]

no worries. im pretty tired. not too switched on. haha

[kingmick]

no probs it was pretty average joke anyway!